SawStop Industrial Cabinet Saw defines an industrial grade 10 inch cabinet saw for serious woodworking operations. The saw is described as the heaviest, most powerful and highest quality 10 inch cabinet saw available, which supports continuous, demanding use in production environments where a lighter machine could slow down throughput or drift out of calibration more quickly. The 7.5hp motor in a 3 phase, 480v configuration delivers substantial power to drive full-depth cuts in dense material without stalling, helping maintain feed speed and clean edges in industrial workflows. A 69-1/4 inch width, 36-1/2 inch depth, and 34 inch height footprint provides a stable, predictable platform for work handling, so operators can set up infeed and outfeed around a known machine envelope. Almost 700lbs of iron and steel construction adds mass that resists vibration, supporting smoother cuts and consistent accuracy over time in shop conditions.
The SawStop Industrial 10 inch table saw with 69-1/4 inch width, 36-1/2 inch depth, and 34 inch height gives a defined footprint, which helps position the saw so infeed, outfeed, and side support can be aligned to that geometry. The 7.5hp, 3 phase, 480v configuration specifies an industrial power requirement, which aligns with facilities already wired for 3 phase equipment and supports stable motor performance under continuous load. The upgraded 36 inch Industrial T-Glide Advance Rip Fence System establishes a clear rip capacity reference along the front of the table, which helps installers align auxiliary tables or rollers to the fence travel path. The almost 700lbs of iron and steel mass supports stable placement once installed, which can reduce the need to re-level or re-square after the saw is positioned in the shop layout.
The SawStop Industrial 10 inch table saw with 7.5hp, 3 phase, 480v power is oriented to industrial and high-volume woodworking environments, which rely on a cabinet saw to handle dense hardwoods, sheet goods, and repeated setups throughout the day. The description as the heaviest, most powerful and highest quality 10 inch cabinet saw available positions it for shops that demand a primary saw as a central workhorse rather than a secondary station. The upgraded 36 inch Industrial T-Glide Advance Rip Fence System suits workflows that require frequent rip adjustments, because the fence system establishes a stable reference for repeated cuts along its travel. The 69-1/4 inch by 36-1/2 inch overall size, combined with a 34 inch working height, integrates into standard bench and outfeed heights, which helps create a level plane between this saw and adjacent support surfaces.
The SawStop safety system that stops on contact with skin adds a significant safety-focused feature, which can reduce the severity of accidental contact events and support continued operation in shops where safety performance is closely tracked. Almost 700lbs of iron and steel construction adds mass and rigidity to the cabinet and table assembly, which helps the saw maintain alignment of the blade, fence, and miter paths through regular use and material impacts. The 7.5hp, 3 phase, 480v motor rating provides abundant power headroom, which allows operators to use full-depth cuts in thicker material while maintaining consistent blade speed for clean edges. The Industrial T-Glide Advance Rip Fence System on a 36 inch rail length is designed for durability and stability, which supports accurate rip settings that hold during long production runs and repeated fence movements.
The ICS73480-ATGI36 model is described as the SawStop Industrial Cabinet Saw, a 10 inch cabinet saw intended for industrial-grade woodworking applications where a heavy, powerful machine is needed.
The SawStop Industrial 10 inch table saw uses a 7.5hp, 3 phase, 480v motor, which delivers high power for cutting dense materials and maintaining blade speed in demanding shop workflows.
The industrial cabinet saw measures 69-1/4 inches wide, 36-1/2 inches deep, and 34 inches high, which defines its floor footprint and working height for integrating into a shop layout.
This SawStop saw has an upgraded 36 inch Industrial T-Glide Advance Rip Fence System, which offers a stable rip reference for accurate, repeatable cutting in industrial use.
The SawStop safety system on this model is described as stopping on contact with skin, which adds a safety-focused feature to reduce the impact of accidental blade contact events.
The saw is built with almost 700lbs of iron and steel, which adds mass and rigidity that support reduced vibration and more consistent cutting performance over time.
The SawStop Industrial Cabinet Saw with 7.5hp, 3 phase, 480v power, a 10 inch cabinet saw format, and a 36 inch Industrial T-Glide Advance Rip Fence System is oriented to shops that depend on an industrial-grade primary saw. Its 69-1/4 inch width, 36-1/2 inch depth, and 34 inch height, combined with almost 700lbs of iron and steel, support stable placement and consistent performance in demanding workflows. For operations that value the SawStop safety system that stops on contact with skin, this configuration ties high power, industrial build, and safety-focused design into a single saw choice.
Sold In: 1 Set