SawStop Industrial Cabinet Saw defines an industrial-grade 10 inch cabinet saw built for demanding shops. The saw uses a 7.5hp, 3 phase, 480 volt motor configuration, which delivers the power needed for continuous cutting in heavy production without bogging under load. The cabinet saw format provides a stable base, so the table stays steady during long rips and crosscuts on sheet goods and thick stock. The Industrial design is described as the heaviest 10 inch cabinet saw available, which reflects a focus on mass and rigidity that support accurate cuts over time. The saw integrates the SawStop safety system that stops on contact with skin, adding a layer of protection during normal sawing operations. An upgraded 52 inch Industrial T-Glide Advance Rip Fence System supports wide rip capacity, so installers and fabricators can handle large panels and casework parts on one station.
The saw footprint of 85-1/4 inches wide by 36-1/2 inches deep and 34 inches high defines how it occupies floor space, which helps with planning clearance around infeed and outfeed zones. The 52 inch rail length on the Industrial T-Glide Advance Rip Fence System provides long front rail support, which stabilizes fence settings when ripping wider workpieces. The 34 inch table height matches common bench and machine heights in many woodworking shops, which supports smooth material transfer between workstations. The industrial cabinet layout combines these dimensions with the heavy build, so the saw stands as a fixed anchor point in the workflow rather than a portable tool.
The SawStop Industrial 10 inch table saw is positioned for use in demanding industrial environments, which makes it suitable for shops that run extended shifts and high volumes of cuts. The description as the heaviest, most powerful 10 inch cabinet saw points toward applications where stability and power are critical, such as production cabinet shops and millwork facilities. The 7.5hp, 3 phase, 480 volt setup works with electrical systems built for industrial equipment, so the saw can operate as a central machine alongside other large tools. The 85-1/4 inch width and 52 inch rail system support handling full cabinet sides and wide components on the table, reducing the need to break down material on separate machines. Almost 700 pounds of iron and steel give the saw the mass to stay planted while ripping heavy stock, which supports accurate cuts over repeated passes.
The upgraded 52 inch Industrial T-Glide Advance Rip Fence System provides a long, rigid fence track, which helps the fence stay square to the blade when locking in rip settings for repeat work. The SawStop safety system that stops on contact with skin operates at the blade, which allows users to focus on feed control and layout while working within a safety-focused design. The heavy iron and steel construction adds inertia that resists movement from pushing large panels, which helps keep the table still and the blade aligned to the miter slots over time. The 36-1/2 inch depth and 34 inch height frame a comfortable working reach, so operators can guide stock past the blade with stable body positioning. Together, the motor configuration, mass, and fence system support consistent, reliable performance in the most demanding industrial environments.
The SawStop Industrial Cabinet Saw uses a 7.5hp, 3 phase, 480 volt motor and almost 700 pounds of iron and steel, which supports continuous duty and stable cutting in demanding shop environments.
The SawStop safety system on this saw stops on contact with skin, which helps limit blade contact severity during routine ripping, crosscutting, and other table saw operations.
The 52 inch Industrial T-Glide Advance Rip Fence System extends rip capacity and provides a long, stable fence, which helps when sizing wide cabinet panels and large casework parts.
The saw measures 85-1/4 inches wide, 36-1/2 inches deep, and 34 inches high, which defines space requirements and working height in a shop layout.
The 7.5hp, 3 phase, 480 volt configuration supplies strong, consistent power, which supports steady feed rates and reliable performance on thick or dense materials.
The almost 700 pounds of iron and steel add mass that reduces vibration, which supports smoother cuts and repeatable accuracy over long production runs.
The SawStop Industrial Cabinet Saw 10 inch model ICS73480-ATGI52 brings a 7.5hp, 3 phase, 480 volt configuration together with a 52 inch Industrial T-Glide Advance Rip Fence System and almost 700 pounds of iron and steel. These details support consistent, reliable performance in the most demanding industrial environments, from cabinet shops to millwork production. For operations planning a central cutting station with wide rip capacity, integrated SawStop safety system, and a stable cabinet saw footprint, this configuration offers a focused solution for daily production work.
Sold In: 1 Set