Knape and Vogt overlay door hinge kit gives pocket door installations a dedicated hinge solution that is matched to KV pocket door slides. This hinge kit is designed for pocket door hardware applications, so the hinge setup supports the opening and closing action that these slide systems are built to deliver in multimedia and workspace components. The product sits in the pocket door hardware class, aligning the hinge function with the motion demands of KV pocket door slides in closets or similar organizational layouts where a retracting door is needed around storage or media equipment.
The hinge kit uses a self-closing design, so the door is pulled shut at the end of its travel without separate closing devices. That self-closing action supports consistent door positioning, which helps keep doors properly aligned against the cabinet face when the slide system is used on a regular basis. A nickel finish is used on this hinge kit, giving the hardware a neutral metallic appearance that integrates with many cabinet hardware choices while providing a clean look around the pocket door opening in multimedia or workspace cabinetry.
This overlay door hinge kit is defined for 3/4 inch door thickness, so door construction can follow standard 3/4 inch material without changing thickness just for the hinge. That alignment between hinge specification and door stock simplifies planning in multimedia and workspace components where pocket doors must match adjacent door faces. A 3/4 inch cup diameter is specified, setting a clear boring size and allowing a consistent bore pattern any time this hinge kit is used again. For installers, matching a 3/4 inch cup boring tool to this hinge spec helps repeat drilling quickly across multiple doors, keeping cup placement predictable and supporting smoother jobsite workflows when several pocket doors use the same Knape and Vogt hardware layout.
This Knape and Vogt overlay door hinge kit is built for KV pocket door slides within the pocket door hardware category, so it fits projects where doors must retract into a cabinet or enclosure. The hinge kit matches the requirements of pocket door slides used in multimedia and workspace components, supporting applications like media centers or workspace cabinets organized under shelf, closet, and garage storage systems. Its 3/4 inch door thickness specification keeps it aligned with typical cabinet doors in these environments, allowing door faces to stay consistent across an installation using standard 3/4 inch panels.
The 3/4 inch cup diameter in this hinge kit guides the boring work for these pocket doors, so every door that pairs with KV pocket door slides can be drilled to the same cup size. Because the hinge is self-closing, it is especially suited to installations where doors need to return to the closed position reliably at the front of a cabinet after use, helping multimedia or workspace doors sit flush before they are retracted on the pocket slides. The nickel finish lets the hinge integrate visually with other nickel-toned hardware frequently used in closet and garage organization projects.
The overlay design of this Knape and Vogt hinge kit ties closely to slide positioning on pocket door systems, so once the door thickness and cup diameter are set to the 3/4 inch specifications, installers can repeat the same layout across multiple openings. Because this hinge kit is defined for 3/4 inch door thickness, the overlay relationship to the cabinet structure stays consistent from one door to another, which helps maintain even reveal lines and reliable travel when doors open before sliding back into the cabinet.
The 3/4 inch cup diameter specification helps cabinet shops and field installers standardize their boring setup for this hinge kit, so a single bore size serves all doors using the 8080 HKL SAL part. The self-closing function within the hinge contributes to repeatable results by pulling each door to the same closed position before retraction, which supports uniform alignment across a run of doors on KV pocket door slides. With a nickel finish, the hardware maintains a consistent appearance that matches many other Knape and Vogt pocket door components in professional woodworking environments.
The Knape and Vogt overlay door hinge kit is intended for KV pocket door slides, so the hinge function works with that specific pocket door hardware setup.
The hinge kit is specified for 3/4 inch door thickness, so doors built from 3/4 inch material align with the designed hinge geometry.
The Knape and Vogt overlay door hinge kit uses a 3/4 inch cup diameter, so door boring is based on a 3/4 inch hinge cup hole.
The self-closing hinge action pulls the door closed at the end of travel, positioning the door consistently before it retracts with the pocket door slides.
The hinge kit has a nickel finish, giving the pocket door hardware a neutral metal look that coordinates with many cabinet components.
The manufacturer part number is 8080 HKL SAL, which identifies this specific Knape and Vogt overlay door hinge kit for KV pocket door slides.
The Knape and Vogt overlay door hinge kit for KV pocket door slides ties hinge geometry directly to pocket door motion, helping pocket doors function smoothly in multimedia and workspace components. With a 3/4 inch door thickness specification and 3/4 inch cup diameter, the kit aligns naturally with standard cabinet doors built from 3/4 inch stock. The self-closing hinge action and nickel finish support consistent operation and appearance in pocket door hardware layouts. For pocket door projects that rely on KV pocket door slides and standard 3/4 inch doors, this hinge kit provides a matched hinge solution ready for those applications.
Sold In: 1 Kit