closet rod center support oval is designed by Pro Value Series as a screw mounted support for oval closet rods sized 1-1/8 x 5/8 inch (15mm x 30mm), so it works specifically with this common oval tubing profile in closet layouts. The oval design matches the 15mm x 30mm rod dimensions, helping the rod seat properly and reducing unwanted movement along the length. An overall size of 1.732 inches wide by 2.953 inches high keeps the support compact on the panel while still presenting enough surface area for stable mounting on the cabinet or wall surface. The dull brass finish provides a consistent appearance for projects using brass-colored closet rods and flanges, which helps maintain a unified look across all visible hardware. This Pro Value Series component fits into Closet Tubing & Flanges projects where a dedicated center support is needed along a longer span.
This Pro Value Series closet rod center support uses a screw mounted design, so it relies on mechanical fasteners through its mounting points to secure the support to a substrate. The 1-3/16 inch (30mm) center-to-center dimension between these mounting points sets the layout for drilling, which helps align the support on cabinet panels or wall cleats during installation. Its geometry is designed for an oval closet rod sized 1-1/8 x 5/8 inch (15mm x 30mm), so the rod sits into the support in line with its oval profile. With an overall size of 1.732 inches wide by 2.953 inches high, the part occupies a modest area on the mounting surface, which leaves room for surrounding shelving components while still distributing load through its footprint.
This Pro Value Series closet rod center support is used in Shelf, Closet & Garage Organization applications within the Closet Tubing & Flanges product class, so it fits projects that rely on oval tubing for hanging storage. It is designed specifically for oval closet rods sized 1-1/8 x 5/8 inch (15mm x 30mm), which means it matches those tubing dimensions when placed under a run of that rod. The overall dimensions of 1.732 inches wide by 2.953 inches high allow it to sit beneath a closet shelf or along a vertical panel without demanding excessive space. Its dull brass finish ties into designs that feature brass toned tubing and flanges, helping deliver a visually consistent hanging section in bedroom or storage closets.
The screw mounted construction of this closet rod center support allows fastening through defined mounting points, so the support remains in the position set during layout. The 1-3/16 inch (30mm) center-to-center spacing between these screw locations gives a fixed reference for drilling holes, supporting repeatable installation when several supports are laid out across multiple sections. Because the support is designed for an oval rod sized 1-1/8 x 5/8 inch (15mm x 30mm), the rod nests relative to that profile, helping keep the hanging line consistent along its run. Its overall footprint of 1.732 inches wide by 2.953 inches high spreads contact across the mounting surface, which helps the support share hanging loads along the panel or framing length.
This closet rod center support is designed to support an oval closet rod sized 1-1/8 x 5/8 inch, or 15mm x 30mm, so it matches that specific tubing profile during installation.
The Pro Value Series closet rod center support is screw mounted, so it fastens to the mounting surface through its screw locations for a fixed, mechanical installation.
This center support has a 1-3/16 inch, or 30mm, center-to-center dimension between mounting points, which guides drilling locations during layout.
The closet rod center support measures 1.732 inches wide by 2.953 inches high, providing a compact yet stable footprint on the mounting surface.
This center support has a dull brass finish, so it visually coordinates with dull brass closet rods and flanges in the same installation.
This part belongs to the Closet Rods & Flanges product class in the Shelf, Closet & Garage Organization category, aligning it with closet tubing projects.
The Pro Value Series 54215 47 002 closet rod center support offers a screw mounted solution tailored to oval closet rods sized 1-1/8 x 5/8 inch, or 15mm x 30mm. With a defined 1-3/16 inch center-to-center mounting dimension and an overall size of 1.732 inches wide by 2.953 inches high, it fits well within Closet Tubing & Flanges layouts where dull brass hardware is desired. Selecting this dull brass center support aligns the support, rod size, finish, and mounting details for organized closet hanging sections.
Sold In: 1 Each