Pro Value Series closet rod support dull chrome

Closet Rod Center Support Oval For Rod Stability

closet rod center support oval is designed to support an oval closet rod sized 1-1/8 x 5/8 inches (15mm x 30mm), so it fits standard oval closet tubing and keeps the rod properly seated under load. The Pro Value Series branding identifies it as part of a coordinated line of closet rods and flanges, which helps keep parts consistent across a project. The support uses a dull chrome finish, which gives a neutral metallic look that blends with typical closet hardware and helps maintain a uniform appearance across multiple openings. An overall size of 1.732 inches wide by 2.953 inches high (44mm x 75mm) gives the bracket a compact footprint while still presenting enough bearing surface against the mounting surface for solid support. This center support is sold per each, which allows straightforward counting for runs that need multiple intermediate supports.

Key Closet Rod Support Details For Projects

• The center support is designed for oval closet rod sized 1-1/8 x 5/8 inches (15mm x 30mm), so it matches common oval tubing and helps keep rod selection straightforward for installers planning standard closet layouts.
• A 1-3/16 inch (30mm) center-to-center dimension is specified, which gives a fixed reference for hole spacing so installers can lay out mounting points consistently from job to job.
• The overall size of 1.732 inches wide by 2.953 inches high (44mm x 75mm) keeps the bracket compact on the wall or panel while still presenting enough surface area to distribute forces from loaded rods.
• The support is screw mounted using (2) #6 x 3/4 inch screws, so it uses familiar fasteners that seat quickly in typical closet partitions, trim, or wood panels without requiring specialized tools.
• The dull chrome finish provides a subdued metallic appearance that coordinates with chrome closet rods and flanges, helping finished installations look visually consistent along the full run.
• Sold per each, the part can be ordered in exact quantities for single center supports or multiple intermediate supports on longer closet rod spans.

Mounting And Layout Details For This Support

This Pro Value Series closet rod center support is screw mounted, using two #6 x 3/4 inch screws, so installers can secure it directly to wood or similar substrates with standard drivers in a single pass. The 1-3/16 inch (30mm) center-to-center dimension defines the screw spacing, which simplifies drilling or pre-marking when repeating the layout on several supports along a long closet run. With an overall width of 1.732 inches and height of 2.953 inches (44mm x 75mm), the support seats neatly on vertical panels or end gables while leaving space around it for adjacent hardware or shelving. Because it is designed for an oval closet rod sized 1-1/8 x 5/8 inches (15mm x 30mm), the support holds that specific tube profile, helping keep the rod aligned and resisting rotation under hanging loads.

Using This Dull Chrome Oval Center Support

Where This Oval Closet Rod Support Fits Best

This closet rod center support is designed to support oval closet rod sized 1-1/8 x 5/8 inches (15mm x 30mm), so it fits projects built around that specific tubing profile, such as standard residential or light commercial closets using oval rod systems. The Pro Value Series classification places it within the Closet Tubing & Flanges product class, which aligns it with other closet rods and supports used in shelf, closet, and garage organization layouts. An overall bracket size of 1.732 inches wide by 2.953 inches high (44mm x 75mm) lets it sit cleanly on gables, wall cleats, or back panels without crowding adjacent components, which is helpful in tight reach-in sections. The dull chrome finish suits installations where a low-gloss metallic tone is preferred, so the support coordinates with matching rods and end flanges along the full span.

Details That Support Consistent Rod Alignment

The specified 1-3/16 inch (30mm) center-to-center dimension between mounting points gives installers a precise value for screw spacing, which helps align multiple supports on a long rod so the tube seats evenly from one bracket to the next. Screw mounting with (2) #6 x 3/4 inch screws ties the support firmly to the substrate, so the oval rod sized 1-1/8 x 5/8 inches (15mm x 30mm) stays captured in place along the center of the run. Its classification as a closet rod center support indicates that it is intended for intermediate locations between end flanges, which helps distribute the weight of hanging clothes along the tube rather than concentrating it at the ends. The overall size of 1.732 inches by 2.953 inches (44mm x 75mm) balances a small footprint with enough body to cradle the oval profile, supporting repeatable alignment across multiple closets in the same project.

Common Questions About This Closet Rod Support

Selecting This Support For Oval Closet Rod Runs

The Pro Value Series closet rod center support in dull chrome is designed for oval closet rod sized 1-1/8 x 5/8 inches (15mm x 30mm), so it fits standard oval tubing layouts. With a 1-3/16 inch (30mm) center-to-center screw spacing and an overall size of 1.732 inches wide by 2.953 inches high (44mm x 75mm), it offers predictable mounting geometry for repeat installations. Screw mounting with (2) #6 x 3/4 inch fasteners ties the support securely to panels, helping carry hanging loads along interior closet runs. Sold per each, it can be ordered to match the number of center supports needed on any given rod span.