NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR07A42SMB1EUF1 to RSR07A42SMB1EUF1.
Omega National 42"W Walnut Omni Wall Mount Range Hood gives you a modern, block-style wood hood that creates a bold focal point over the cooktop, which helps anchor the wall run visually in higher-end kitchens. This wood range hood is part of the Omega National Products line, so it aligns with typical shop expectations for a hardwood decorative hood when planning layouts with wood range hoods as a category. The 42 inch width and wall-mount design establish the coverage area over standard cooking zones, which simplifies cabinet spacing and upper cabinet layout around the hood body. The walnut construction presents a warm wood appearance that pairs with walnut cabinetry programs, which matters when matching grain and color across doors, panels, and the hood shell on a job. As a wood range hood, it suits projects where the hood is treated as a furniture-like element rather than a basic metal shell.
This Omega National wood range hood uses a French cleat hanging system, which sets up a two-part mount where the cleat on the wall engages the cleat on the hood body for the final hang. That approach supports pre-leveling the wall cleat, which matters when you want the hood to sit straight relative to upper cabinets and tile lines. The hood height is adjustable because the body can be trimmed, allowing you to bring the lower edge to a target working height between the cooktop and the ceiling line. The integrated silver metallic powder-coated liner is designed around Broan ventilation, so the opening dimensions and layout support pairing the liner with a compatible Broan ventilator unit in the field.
This Omega National 42"W Walnut Omni Wall Mount Range Hood is intended for wall-mount installations, so it fits above a cooking surface located against a wall rather than over an island. The 42 inch width sets the footprint for planning over standard or wider ranges, which helps when you are aligning base cabinets and ensuring the hood body spans the cooking zone visually. As a walnut wood range hood, it is suited to kitchen projects that use walnut doors, face frames, or accents, since the hood can read as part of the same wood story. The modern, block-style design provides straight lines, which integrates cleanly with frameless or simple Shaker door programs when a project calls for a strong but simple hood form.
The adjustable height on this wood range hood means the hood can be trimmed to fit your space, giving flexibility when you are working under varying ceiling heights or tying into different tile stop points. This helps you maintain consistent reveal lines and sightlines without redesigning the hood for each job. The French cleat hanging system installs easily by design, because you can fasten the wall cleat first, check its position against adjacent cabinetry, and then hang the hood shell onto it for the final placement. This reduces handling time when lifting the hood body and helps during solo or small-crew installations. The silver metallic powder-coated liner is designed to fit Broan ventilation, which gives you a predefined interior cavity sized around Broan ventilator options, making it easier to plan duct transitions and blower placement inside the hood body. Because the Broan ventilator is sold separately, you can use the same hood and liner across different projects while selecting the Broan unit that aligns with the specific performance requirements of each job.
The Omega National 42"W Walnut Omni Wall Mount Range Hood is a wood range hood designed for wall mounting, so it serves as a decorative wood shell over the cooking area.
The adjustable height lets the hood be trimmed to fit your space, so you can align the finished hood height with ceiling lines or backsplash terminations on different installations.
This Omega National wood range hood installs using a French cleat hanging system, allowing you to set the wall cleat first and then hang and level the hood on that cleat.
The silver metallic powder-coated liner is designed to fit Broan ventilation, providing an interior metal surface that works with a separately selected Broan ventilator unit.
This hood has a modern, block-style design that creates a bold focal point, so it can act as the primary visual feature on the cooking wall in a kitchen layout.
A walnut wall mount range hood works well in kitchens using walnut cabinetry or accents, where the hood is intended to coordinate with the wood species and finish across the room.
The Omega National 42"W Walnut Omni Wall Mount Range Hood with silver metallic powder-coated liner suits projects that call for a modern, block-style wood range hood over a wall cooking surface. The adjustable height allows trimming the hood to fit varied ceiling conditions and backsplash layouts from job to job. The French cleat hanging system supports a straightforward wall-mount process that aligns well with cabinet installation workflows. With a liner designed to fit Broan ventilation and the ventilator sold separately, this hood gives you flexibility to pair the decorative wood shell with Broan options on each project. For kitchen work that needs a walnut wood focal point over the range, this model is configured to integrate into professional and serious DIY installations.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RSDPRHVBF300SS Mfr# RHVBF300SS | Broan Select Stainless Steel Range Hood Ventilator, 260 CFM | ||||
Sold in: 1 Each | RSRHVBF300SS Mfr# RHVBF300SS | Broan Select Stainless Steel Range Hood Ventilator, 260 CFM | ||||
Sold in: 1 Each | RSDPRHVB400SS Mfr# RHVB400SS | 21-3/8" Broan Select Stainless Steel Range Hood Ventilator, 400 CFM | ||||
Sold in: 1 Each | RSRHVB400SS Mfr# RHVB400SS | 21-3/8" Broan Select Stainless Steel Range Hood Ventilator, 400 CFM | ||||
Sold in: 1 Each | RSRHVB600SSV Mfr# RHVB600SSV | Broan Select Stainless Steel Range Hood Ventilator, 600 CFM |