Festool 5 inch Granat profile foam sanding discs use a soft foam-backed abrasive to sand contours, profiles, and detailed surfaces, so they handle shaped work where flat discs struggle. The flexible 1/2 inch (13 mm) PU foam core supports the abrasive while letting it compress into curves, which helps maintain consistent contact on moldings and raised details. The hook and loop backing holds firmly to compatible sanding pads, helping discs stay in place while still allowing quick disc changes between steps. The Granat aluminum oxide abrasive is designed for high performance on wood, paint, plastics, acrylics, fillers, and modern coatings, so the same disc series can carry a project through mixed materials. The medium grit cut levels surfaces without being overly aggressive, which supports controlled stock removal on profiles and decorative edges.
The 5 inch medium grit Granat profile discs use hook and loop attachment, so they pair with sanders or pads that share the same interface to create a stable backing during use. The foam-backed construction allows the abrasive face to flex into contours and along edges, which maintains more uniform pressure than a rigid disc on profiled work. The 1/2 inch (13 mm) PU foam core supports this flex while also keeping the abrasive face backed up, so edges of the disc remain effective on details instead of folding away. Because the Granat abrasive is engineered for wood, paint, plastics, acrylics, fillers, and modern coatings, these discs can stay on the tool as work moves across those materials.
The soft foam-backed abrasive in these Festool Granat profile discs molds to contours, edges, and profiles, so they are suited to moldings, spindles, raised panels, and decorative details. On moldings, the flexible 1/2 inch (13 mm) PU foam core lets the abrasive follow concave and convex sections in a single pass, which supports even scratch patterns around the full profile. When sanding turned spindles, the foam backing keeps contact around the diameter as the workpiece turns, so flat spots are less likely compared with a rigid pad. Raised panels benefit from the disc conforming over the panel field into the beveled edges, helping blend transitions between surfaces. Decorative details in wood, paint, plastics, acrylics, and fillers see the abrasive flex into small radii and recesses, allowing consistent surface preparation across complex shapes.
The high-performance Granat aluminum oxide abrasive used on these discs is formulated for wood, paint, plastics, acrylics, fillers, and modern coatings, so one abrasive line handles common finishing systems without frequent material-specific changes. On wood, the abrasive levels fibers and shapes profiles while the foam core cushions the cut, which supports controlled sanding along edges. On paint and modern coatings, the same Granat layer works to smooth surfaces while the foam backing helps reduce cutting through at high spots, supporting more uniform results on contoured doors or trim. On plastics and acrylics, the cushion of the 1/2 inch (13 mm) PU foam limits sharp pressure points at the disc edge, helping maintain an even scratch pattern. Across fillers used in profiled repairs, the combination of Granat abrasive and foam backing lets the disc feather edges into surrounding material, which aids in blending repairs before topcoats.
The Festool 5 inch Granat profile foam sanding discs in this version use a medium grit, giving a balance between shaping power and surface refinement on profiled work.
The foam-backed abrasive combines a soft surface with a 1/2 inch PU foam core, allowing the disc to mold to contours and edges so profiles are sanded without flattening details.
The Granat aluminum oxide abrasive is designed for wood, paint, plastics, acrylics, fillers, and modern coatings, so one disc type can move across those materials on the same job.
These foam-backed profile discs are designed for moldings, spindles, raised panels, and decorative details, focusing on shaped parts where flat sanding tools miss contours.
The hook and loop backing lets the disc fasten to matching pads securely while still allowing quick changes, which supports efficient grit progression on repetitive sanding tasks.
The 1/2 inch PU foam core provides flexibility with support, so the abrasive can flex into curves yet stay backed up, maintaining more uniform pressure on profiles and edges.
The Festool 5 inch Granat profile foam sanding discs with medium grit, hook and loop backing, and a 1/2 inch PU foam core are built for sanding contours, profiles, and detailed surfaces in wood, paint, plastics, acrylics, fillers, and modern coatings. Their soft foam-backed abrasive molds to moldings, spindles, raised panels, and decorative details, supporting consistent surface preparation across complex shapes. Selecting these discs aligns the abrasive, foam core, and hook and loop attachment to the demands of detailed profile sanding work.
Sold In: 1 Box