Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Festool 5 inch Granat profile sanding discs are soft foam-backed, super fine grit hook and loop aluminum oxide sanding discs designed for sanding contours, profiles, and detailed surfaces. The flexible 1/2 inch (13 mm) PU foam core supports the abrasive while compressing into curves, so the sanding surface stays in contact with moldings, spindles, raised panels, and decorative details. The soft foam backing molds to edges and profiles, which helps the abrasive follow shapes instead of cutting flats across them. The high-performance Granat abrasive layer delivers consistent, high-quality results on wood, paint, plastics, acrylics, fillers, and modern coatings, so the same disc can move across multiple common shop materials. The super fine grit finish supports smooth, professional surface preparation where refined scratch patterns matter before coating or polishing.
The super fine grit hook and loop design allows quick attachment and removal from compatible sanding backup pads, which supports efficient changes between grits or profiles during a finishing sequence. The 5 inch diameter format presents a familiar disc size for many sanding setups, so the abrasive face provides a broad yet controlled contact patch on contoured work. The foam core compresses into profiles during use, helping the abrasive maintain alignment along moldings, spindles, raised panels, and decorative details. The Granat abrasive layer then cuts across wood, paint, plastics, acrylics, fillers, and modern coatings in a controlled way, so the user can refine surfaces without aggressive stock removal at this super fine stage.
The soft foam-backed abrasive is designed for sanding contours, profiles, and detailed surfaces, so it fits work such as furniture moldings, trim profiles, turned spindles, raised door panels, and decorative carvings. The foam backing molds to contours, edges, and profiles, allowing the abrasive to contact inside curves and complex shapes where flat pads leave untouched bands. This behavior supports tasks where raised panels transition into frames, or where spindle details need a uniform scratch pattern before finishing. The combination of Granat abrasive with a flexible 1/2 inch (13 mm) PU foam core suits projects that blend wood, paint, plastics, acrylics, fillers, and modern coatings on the same assembly, because the same disc can sand across these materials. The super fine grit hook and loop design suits final passes that prepare surfaces for coatings over detailed profiles.
The flexible 1/2 inch (13 mm) PU foam core under the Granat abrasive allows the sanding face to float slightly over profiles, which helps control pressure on edges and reduces the tendency to cut flats into shaped parts. Because the soft foam backing molds to contours, edges, and profiles, the abrasive follows the existing geometry and supports maintaining sharp design lines on moldings and decorative details. The high-performance Granat abrasive delivers consistent, high-quality results, so the scratch pattern stays even on wood, paint, plastics, acrylics, fillers, and modern coatings as the disc moves across joined materials. The super fine grit rating helps refine previous sanding steps, leaving a surface suited to smooth, professional results on modern finishes and coatings. The hook and loop backing supports repeat disc changes without damaging the foam core during typical finishing workflows.
Festool 5 inch Granat profile sanding discs use a high-performance Granat aluminum oxide abrasive, which provides consistent, high-quality sanding results across wood, paint, plastics, acrylics, fillers, and modern coatings.
The soft foam backing molds to contours, edges, and profiles, so the abrasive contacts moldings, spindles, raised panels, and decorative details without flattening their shapes during sanding.
The Granat profile discs use a flexible 1/2 inch (13 mm) PU foam core, which compresses into curves and profiles so the abrasive face stays engaged on complex surfaces.
The Granat abrasive is designed for consistent results on wood, paint, plastics, acrylics, fillers, and modern coatings, so one disc can work across mixed-material assemblies.
The super fine grit helps produce smooth, professional results on detailed surfaces, refining earlier sanding steps before applying coatings or working on modern finishes.
The hook and loop backing lets the Festool Granat profile discs attach and release quickly from compatible pads, supporting fast changes between discs during finishing sequences.
The Festool 5 inch Granat profile sanding discs combine a flexible 1/2 inch (13 mm) PU foam core with a high-performance Granat abrasive, so they are well suited to sanding contours, profiles, and detailed surfaces. The soft foam backing molds to edges, moldings, spindles, raised panels, and decorative details while the super fine grit hook and loop design supports controlled finishing work. For projects involving wood, paint, plastics, acrylics, fillers, and modern coatings on profiled components, these discs provide a focused option for detailed surface preparation.
Sold In: 1 Box