Sugatsune Inset Pocket Door Kit, Min. Cab. Depth 19-1/2", Door Height 63" - 78-3/4", 4-Slides, - ALT-ST20-D360L-19
Description
Sugatsune Inset Pocket Door Kit For Cabinets
Sugatsune inset pocket door kit gives an inset cabinet door a controlled slide and soft close, so the door can move smoothly as part of a pocket door installation. The kit is designed as pocket door hardware for cabinetry using the ALT-ST20-D360L-19 pocket door configuration, giving installers a defined system instead of mixing components. As a pocket door hardware solution in the pocket door slides category, it organizes movement, damping, and hinging into one coordinated layout. The inset pocket door system is part of Sugatsune America pocket door hardware, which supports multimedia and workspace cabinet projects. A minimum cabinet depth of 19-1/2 inches is specified, so cabinets can be sized or selected to that depth to achieve correct travel. The kit supports door heights from 63 inches to 78-3/4 inches, allowing it to cover a range of tall cabinet doors in one hardware standard.
Key Pocket Door Hardware Details For Projects
- The specified minimum cabinet depth of 19-1/2 inches sets the pocket space required, so cabinet cases can be laid out to give the door full slide travel without interference.
- The door height range of 63 inches to 78-3/4 inches defines where this pocket door hardware applies, so tall doors within that band can use the same system in a project run.
- The system uses four slides, so door motion is guided along multiple tracks, which supports smoother linear movement over the full height of the opening.
- A synchronized board is part of the pocket door system, tying slide motion together so both sides of the door operate in unison during opening and closing.
- Three hinges and three hinge mounting plates are specified, so the door pivots from a defined point before and after sliding, helping keep reveals and gaps consistent.
- Five-speed adjustable soft-closing dampers control the final closing motion, so the door can be tuned to close gently at different speeds to match the cabinet application.
Installation And Fit Parameters For This System
The inset pocket door system is specified for a minimum cabinet depth of 19-1/2 inches, which sets the carcass depth needed so the door can recess fully on the slides. Door height from 63 inches to 78-3/4 inches is supported, so layout and drilling patterns can be based on that range across multiple cabinets. The ST20 L-type pocket door configuration and ALT-ST20-D360L-19 manufacturer part number identify this specific arrangement of slides, synchronized board, hinges, plates, damper, and installation hardware as a matched system. Four slides mount as the pocket door slide set, so installers can plan side clearances and fastening points consistently along the cabinet interior.
Using This Pocket Door Hardware In Real Projects
Where This Inset Pocket Door Kit Works Best
This inset pocket door system is categorized under shelf, closet and garage organization as well as multimedia and workspace components, so it suits cabinets that need doors to move out of the way for access. The pocket door hardware uses four slides with a synchronized board, so taller doors within the 63 inch to 78-3/4 inch range can travel smoothly into the cabinet without twisting. As Sugatsune pocket door hardware, the ALT-ST20-D360L-19 layout provides a defined pattern for cabinetry in multimedia and workspace builds, helping standardize construction when several identical cabinets are needed. The hinges and hinge mounting plates support an inset door position, so when the door is closed it sits within the cabinet frame line, which is common for built-in storage and workspace cabinetry.
How System Details Support Consistent Results
The four-slide arrangement works together with the synchronized board, so both sides of the door track at the same rate and help keep the door aligned along its height. The minimum cabinet depth of 19-1/2 inches dictates how far the door can recess, which guides carcass dimensions and helps avoid conflicts with interior shelving. Door height support from 63 inches to 78-3/4 inches defines drilling and layout for hinge positions, so installers can repeat hole locations across multiple tall doors. The 5-speed adjustable soft-closing dampers let the door slow down in a controlled way at the end of travel, which reduces slamming and helps protect the cabinet structure and door edges over time. Three hinges with three hinge mounting plates establish consistent pivot points, which helps maintain even gaps along the top and sides when the door is closed as part of an inset design.
Practical Questions About This Pocket Door System
What cabinet depth is this inset pocket door kit designed for?
The Sugatsune inset pocket door kit is specified for a minimum cabinet depth of 19-1/2 inches, which sets the case depth needed for the door to recess properly.
What door height range does the ALT-ST20-D360L-19 pocket door support?
The ALT-ST20-D360L-19 pocket door hardware supports door heights from 63 inches to 78-3/4 inches, covering a range of tall cabinet doors in one system.
How do the four slides function in this pocket door system?
The pocket door system uses four slides to guide the door along the cabinet interior, providing multi-point support for smoother and more controlled travel.
What is the role of the synchronized board in this kit?
The synchronized board connects slide motion so both sides of the door move together, which helps keep the door aligned as it opens and closes.
How do the 5-speed adjustable soft-closing dampers help cabinet use?
The 5-speed adjustable soft-closing dampers slow the door near the end of travel, so closing can be tuned for gentler action that reduces impact on the cabinet.
What do the hinges and hinge mounting plates do in this inset system?
The three hinges and three hinge mounting plates provide the pivot and mounting points for the inset door, helping position the door within the cabinet frame.
Selecting This Kit For Your Pocket Door Build
This Sugatsune inset pocket door kit, identified as ALT-ST20-D360L-19, brings together four slides, a synchronized board, three hinges with three hinge mounting plates, a damper, and installation hardware as a defined pocket door hardware system. The stated minimum cabinet depth of 19-1/2 inches and door height range of 63 inches to 78-3/4 inches outline the cabinet sizes where this inset pocket door system applies, which supports planning for multimedia, workspace, or storage projects. For woodworking professionals sourcing pocket door slides and related pocket door hardware from Wurth Baer Supply, this kit provides a coordinated option for inset pocket door cabinet construction.