
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Sugatsune oval push knob latch combines a knob and latch in one unit, so a single component controls the door opening and locking, which simplifies layout when planning cabinet or enclosure fronts. This DPL-OV Series push knob latch is oval shaped, giving a distinct appearance that also provides an easy hand feel when the knob is popped out. When the knob is pushed in and not in use, it sits flush, which keeps the door surface clean and reduces projections that can catch clothing or materials in tight spaces. When the knob is pressed, it pops out to open the door, so the same motion both releases the latch and presents a grip point for pulling. The door will be locked when the knob is pushed in, giving a clear visual cue that the latch is engaged without extra hardware or indicators. The 22 lbs holding force keeps the door closed against typical cabinet use loads.
This Sugatsune DPL-OV-CR knob latch is specified for door thickness from 15 mm to 25 mm, so it suits a common range of cabinet and enclosure door constructions without special build-ups. That 15 mm to 25 mm range covers materials around 19/32 inch to 63/64 inch, which aligns with many metric and imperial board thicknesses used in casework. The non-handed configuration allows the latch to be installed on either the left or right side of the door, which supports mirrored layouts on runs of cabinets. Because the knob is flush when pushed in, it does not project beyond the door plane during mounting, which helps when doors need to swing past adjacent surfaces or inside tight recesses.
The Sugatsune DPL-OV Series oval shaped knob provides a smooth, rounded shape when it pops out, giving a comfortable grip point while still keeping a compact footprint on the door face. The knob pops out when pressed to open the door, so the motion to release the latch and the motion to access the pull are the same, which shortens the sequence for opening. When the knob is pushed in and not in use, it is flush with the surface, which is useful where projecting pulls could interfere with sliding components or nearby traffic. The door will be locked when the knob is pushed in, so a simple visual check of the knob position shows whether the door is secured.
The 22 lbs holding force rating describes how firmly the latch holds the door closed, which is important for doors that see repeated opening cycles or light impacts in daily use. That holding force helps the door remain closed under routine use, reducing nuisance openings and helping align door gaps along a cabinet run. The specified door thickness of 15 mm to 25 mm gives a clear range where the latch geometry is designed to function properly with the door edge, supporting repeatable results across multiple doors in the same project. Non-handed construction means the same DPL-OV-CR part can be used on left or right side doors, which simplifies ordering and inventory while keeping the look and operation consistent.
The DPL-OV-CR is a Sugatsune DPL-OV Series oval push knob latch that combines a door knob and latch function, which allows one component to handle both gripping and latching.
The Sugatsune oval push knob latch is specified for door thickness from 15 mm to 25 mm, matching many common cabinet door materials used in woodworking projects.
The DPL-OV-CR latch locks the door when the knob is pushed in, so the flush position indicates the latch is engaged and the door is held by the internal mechanism.
This Sugatsune DPL-OV Series latch has a holding force of 22 lbs, which keeps cabinet or enclosure doors closed under normal operating conditions.
The DPL-OV-CR knob latch is non-handed and can be installed on either the left or right side of a door, which supports symmetrical cabinet layouts.
The Sugatsune oval push knob latch pops out when pressed to open the door, then sits flush when pushed back in, giving a simple push-push sequence for access and locking.
The Sugatsune DPL-OV-CR oval push knob latch offers a combined knob and latch layout that suits cabinet or enclosure doors within the 15 mm to 25 mm thickness range. Its 22 lbs holding force keeps doors closed in regular use, while the flush position when pushed in supports clean, unobtrusive fronts. The non-handed design lets the same part work on both left and right side doors, reducing variation across a project. For doors that benefit from a push-to-open, push-to-lock sequence with a compact oval profile, this latch provides a straightforward solution.