Sugatsune DPL-SQ Series Square Push Knob Latch combines a square knob and latch in one unit, so a single component handles both door operation and latching on cabinetry or similar doors. The knob is flush when pushed in and not in use, which keeps the door face clean and reduces the chance of catching clothing or materials in tight workspaces. When pressed, the knob pops out to open the door, giving a positive grip right when the door needs to be operated. The door will be locked when the knob is pushed in, so the latch holds the door closed without a separate lock body. A holding force of 22 lbs keeps the door shut against everyday pulling loads common in cabinets and light doors while still allowing intentional opening. This satin nickel version presents a consistent metallic finish that aligns with typical satin nickel hardware.
The Sugatsune DPL-SQ-SN knob latch is specified for a door thickness range of 15 mm-25 mm, so it fits doors from 19/32 inch to 63/64 inch commonly used in cabinetry and similar constructions. This defined range helps match the latch body and mechanism to the core thickness so the push-and-pop action operates smoothly across the door material. Being non-handed, the latch can be installed on the left or right side, which allows a single part number to service both swing directions across a project. The holding force of 22 lbs is built into the latch design, so once installed to a suitable door within the thickness range, the latch provides consistent closure resistance during normal opening and closing cycles.
This square shaped knob latch fits doors within the 15 mm-25 mm thickness range, so it suits many cabinet and similar door constructions using those material sizes. The non-handed configuration means one Sugatsune DPL-SQ Series Square Push Knob Latch can be applied on either left or right side doors across banks of cabinets, which simplifies stocking for repeat work. When the knob is pushed in, it sits flush with the door surface, which aligns well with applications that favor a flat front appearance such as contemporary cabinet runs or tight corridor storage. The satin nickel finish places this DPL-SQ-SN option within satin nickel design schemes, so it coordinates with satin nickel hinges, pulls, or other visible hardware in the same area.
The knob and latch combined into one unit centers all the interaction at a single point on the door, which helps users operate the door consistently with the same push motion every time. With the door locked when the knob is pushed in, the latch uses a straightforward state: flush position indicates the door is held closed, and the popped-out knob indicates active use. The holding force of 22 lbs is designed into the latch so doors remain shut under regular handling, which is important when doors experience repeated openings during daily activity. The push action that causes the knob to pop out to open the door keeps the motion linear, which suits front-access cabinet faces where users expect direct push-to-open behavior. When repeated across a project using the same manufacturer part DPL-SQ-SN, this consistent action helps standardize user experience from one door to the next.
The Sugatsune DPL-SQ Series Square Push Knob Latch fits door thickness from 15 mm to 25 mm, so it suits doors between 19/32 inch and 63/64 inch commonly found in cabinet and similar door construction.
The latch keeps the door locked when the knob is pushed in, so the flush position holds the door closed and a press causes the knob to pop out to open the door when access is needed.
The non-handed design lets the Sugatsune DPL-SQ-SN knob latch install on either left or right side doors, which helps use a single part across different swing directions in a project.
The knob latch provides a holding force of 22 lbs, which keeps doors closed against normal pulling loads while still allowing users to operate the push-to-open function as designed.
The DPL-SQ-SN knob latch has a satin nickel finish, which aligns with satin nickel cabinet hardware and supports consistent finish selection across hinges, pulls, and latches.
This specific square push knob latch is identified as Sugatsune manufacturer part DPL-SQ-SN, which ties directly to the satin nickel, 22 lbs holding force configuration.
The Sugatsune DPL-SQ Series Square Push Knob Latch in satin nickel offers a knob and latch combined design, a 22 lbs holding force, and a 15 mm-25 mm door thickness range, so it supports many cabinet-style doors using a simple push-to-lock and push-to-open motion.