Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune ESR-10 Series is a 16 inch full-extension side-mount ball bearing drawer slide built from 304 stainless steel, rated at 570 lb per pair, and engineered for the environments where a standard zinc-finish slide simply does not belong. Where moisture, washdowns, chemical exposure, or corrosion are part of the daily reality, this slide brings both the load capacity and the material durability to do the job.
Zinc-finished steel slides serve most indoor cabinet applications well, but they are not the right tool for environments with sustained moisture, chemical cleaning agents, washdown cycles, or high-humidity conditions. The ESR-10's 304 stainless steel members resist corrosion without surface coatings that can chip or wear through. That makes this slide the appropriate choice for commercial kitchen equipment, food processing enclosures, laboratory and cleanroom drawers, marine cabinetry, and any heavy-use industrial enclosure where hygiene or long-term corrosion resistance is a specification requirement. The 570 lb per pair load rating means the material upgrade does not come at the expense of capacity — this slide handles heavy contents in the same demanding settings where the stainless material earns its keep.
The ESR-10 Series is manufactured from 304 stainless steel throughout, the alloy widely used in food service, medical, and marine hardware for its corrosion resistance in wet and chemically active environments. Ball bearings in full-length raceways deliver smooth, consistent travel under the full rated load. The hold-in anti-rebound detent is a mechanical catch — it keeps the drawer shut without spring assist or damping, stopping the bounce-back that occurs when a heavy drawer is pushed firmly closed. This is not a soft-close mechanism and not a self-closing slide: the drawer stays where it is placed and holds position when shut.
The ESR-10 in stainless is specified by commercial kitchen equipment fabricators, laboratory furniture builders, marine cabinetmakers, and industrial enclosure manufacturers who need a full-extension slide that meets both a serious load requirement and a corrosion-resistance standard in the same SKU. At 16 inches, it suits drawers in tighter enclosures and equipment housings where space is constrained but loads are not. Cabinet shops and designers working on residential applications with standard indoor conditions will find the zinc-finish ESR-10 variants a more cost-effective fit; choose this stainless version when the environment demands it.
304 stainless steel offers strong resistance to moisture and most mild corrosives, making it a common choice for marine cabinetry and covered outdoor installations. In saltwater environments with prolonged direct spray exposure, 316 stainless is the more conservative specification. This slide is 304 SS — confirm the grade meets your project's corrosion standard before installing in extreme marine conditions.
No. The hold-in anti-rebound detent is a mechanical catch that holds the drawer closed and stops it from rebounding after a firm push. There is no damper and no spring — the drawer does not slow near the end of travel. For damped soft-close action, look to the soft-close variants in the ESR-10 family.
Side clearance for the ESR-10 Series is not stated in the available product data. Contact Sugatsune or your sales representative for the confirmed clearance spec before sizing the drawer box.
No. The ESR-10 is non-handed — both slides in a pair are identical. Order the quantity that matches your drawer count without sorting left from right.
The sold-as unit is not confirmed in the available product data. Verify the unit (pair or each) at checkout or with your sales contact before placing a volume order.
When the environment calls for stainless and the load demands more than a standard cabinet slide can offer, the Sugatsune ESR-10 in 304 stainless steel delivers full extension and a 570 lb per pair rating without compromise.
