Sugatsune GS-GH50 Series Chrome Glass Hinge, Maximum Glass Size: 35-7/16"W x 98-7/16"H, Sold In: 2 Per Set, - GS-GH50-CR

Sugatsune GS-GH50 Glass Hinge For Large Inset Doors

Sugatsune GS-GH50 glass hinge is a chrome glass door hinge designed for large inset glass showcases, giving installers a dedicated solution for wide and tall display doors that need controlled movement. The hinge is specified for a maximum glass size of 35-7/16 inches wide by 98-7/16 inches high, so it supports tall showcase layouts while keeping door sizing within a defined working range. This GS-GH50 Series hinge is part of Sugatsune Americas glass door hinges class, giving it a clear role in display and showcase construction where glass doors sit inset into the frame. The product is sold in 2 per set, which matches typical pairing on a single tall door or split between smaller doors depending on layout. The chrome finish presents a clean, neutral look that fits commercial or residential display environments where visible hardware needs a consistent appearance.

Key Glass Hinge Details For Showcase Projects

• This hinge is designed for large inset glass showcases, so it supports display installations where the glass door sits within a frame and must align cleanly on all sides for a finished look.
• The hinge allows doors to be temporarily held in frames before fixing screws, which helps installers position and support the glass during layout, reducing handling effort while setting margins.
• A horizontal adjustment screw provides plus or minus 3 mm right and left door position change after installation, letting installers fine-tune reveal alignment without resetting the entire hinge location.
• A height adjustment ring allows the gap below the door to be set from 7 up to 12 mm post installation, so the bottom clearance can be matched to flooring, thresholds, or frame details after the hinge is mounted.
• The design notes that door weight should be prioritized when determining the glass size, guiding layout decisions so hinge loading stays within a realistic working range for long-term door performance.

Adjustment-Focused Hinge Setup And Alignment

This Sugatsune glass door hinge is built around post installation adjustment, so installers can refine fit after the glass door is hung. The horizontal adjustment screw provides plus or minus 3 mm of right and left movement, which can be used to correct small layout shifts and bring inset reveals back to a consistent line along the frame. The height adjustment ring controls the gap below the door from 7 to 12 mm, allowing the bottom clearance to be tuned to sills or casework once the showcase is assembled. Together, these adjustments allow door alignment to be corrected without relocating hinge mounting points, which saves rework time when fitting large glass panels into finished frames.

Using GS-GH50-CR Glass Hinge In Showcase Builds

Where This Chrome Glass Hinge Is Applied

This GS-GH50-CR glass door hinge is designed for large inset glass showcases, so it fits into projects where a glass door must sit flush inside a constructed frame. The specified maximum glass size of 35-7/16 inches wide by 98-7/16 inches high gives a clear envelope for tall display doors, which is useful in museum-style cases, retail showcases, or full-height display cabinets built with framed glass openings. As a glass door hinge in Sugatsune Americas glass door hinges category, it serves applications where hardware needs to carry the panel while preserving a clean visual line. The chrome finish supports installations where exposed hinge components are part of the visible design, aligning with other chrome casework hardware in the same project.

How GS-GH50 Adjustments Support Clean Results

The GS-GH50 Series hinge lets doors be temporarily held in frames before fixing screws, which provides a working hold while checking glass position relative to the frame. This temporary support matters when handling large glass sizes close to the maximum of 35-7/16 inches by 98-7/16 inches, because the panel can be steadied while reveals are checked. After mounting, the horizontal adjustment screw offers plus or minus 3 mm of lateral movement, so minor frame variations or drilling tolerances can be absorbed by the hinge instead of reboring. The height adjustment ring setting of 7 to 12 mm gap below the door allows the installer to match clearances across multiple doors in a run, improving visual uniformity. Design guidance to prioritize door weight when determining glass size keeps the hinge working within its intended loading range, supporting smoother operation of large showcase doors over time.

Common Questions About GS-GH50 Glass Door Hinges

Selecting This Hinge For Large Glass Showcases

The Sugatsune GS-GH50 glass hinge brings chrome-finished hardware, large inset glass showcase design, and post installation adjustment into one solution for tall display doors. The maximum glass size of 35-7/16 inches by 98-7/16 inches defines where it fits best, while the plus or minus 3 mm horizontal adjustment screw and 7 to 12 mm bottom gap adjustment ring support final tuning after the door is hung. For projects that need a defined glass size range and on-frame alignment control, this GS-GH50-CR glass door hinge set offers a focused option for showcase construction.