Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune J160-D22 is a concealed soft-close hinge engineered for 1-inch overlay cabinet doors with a demanding 160-degree swing, finished in a striking black and nickel combination designed to complement contemporary hardware schemes.
A 160-degree opening angle is what separates this hinge from the standard 110-degree cabinet hinge. At 160 degrees, the door swings to a position nearly parallel with the cabinet side, clearing the opening fully and giving unobstructed reach into deep cabinets, pantry units, and storage that sees heavy daily use. Combined with the 1-inch overlay, the J160-D22 suits doors that sit over the cabinet frame or panel by a full inch, which is a common overlay spec in modern frameless and transitional face-frame installations. The hinge cups into the back of the door and connects to a base plate mounted to the cabinet, sold separately. Match a plate from the Sugatsune J160-D22 series to this hinge for proper fit and function; plates from other brands are not compatible.
Zinc gives this hinge dimensional stability and corrosion resistance that holds up in the dry interior environments where cabinet hardware lives. The black and nickel finish is a deliberate design choice: the black body reads as a dark accent while nickel detailing keeps the hardware from disappearing into a dark cabinet interior. For designers specifying mixed-metal or black-accent hardware throughout a kitchen or bath, this hinge carries the finish language into the concealed hardware that opens the door, a detail that matters in glass-front and open-shelf installations where the hinge is occasionally visible during use.
This is the right hinge for projects where wide door access, soft-close performance, and a black-forward finish are all requirements at once. Pantry cabinets, media storage, and tall upper cabinets benefit most from the 160-degree swing. Designers specifying black cabinet pulls, knobs, or drawer slides will find the black and nickel finish integrates naturally without requiring an exact match. The 55-lb-per-pair weight rating covers most solid wood and engineered door constructions within standard thickness ranges. This hinge is for interior, dry installations only.
Yes. This hinge connects to a base plate that mounts to the cabinet, and the plate is sold separately. Use a plate from the Sugatsune J160-D22 series; plates from other brands will not fit this hinge.
A 160-degree hinge swings the door nearly flat against the cabinet side, which gives full, unobstructed access to the interior. It is the right choice for deep pantry units, tall cabinets, and anywhere the door would otherwise block reach into the box.
Yes. Soft-close is integrated, so no separate damper or add-on is needed. The hinge slows the door over its final closing degrees for a quiet, controlled close.
Hinge count depends on door height, width, and weight. As a general starting point, doors up to about 40 inches typically use two hinges, taller doors use three or more. Confirm the count against the Sugatsune load table for your specific door.
Specify the J160-D22 when the design calls for maximum door swing, soft-close performance, and a black-forward finish that carries through to the hardware behind the door.
Sold In: 1 Each
