Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune J160-D22 is a specialty concealed hinge built for 1-inch overlay cabinet doors, opening to a full 160 degrees with integrated soft-close, in a Nickel finish.
Most standard concealed hinges stop at 110 degrees, which handles everyday access just fine. This hinge goes to 160 degrees, a swing that lays the door close to flat against the cabinet side and clears the full opening. That range matters in base cabinets where you reach past the door, in media and display cabinetry where the door needs to fold back out of the frame, and in any run where an adjacent wall or appliance sits close enough that a fully extended door would otherwise block it. The 1-inch overlay positions the door to cover the cabinet side generously, and the integrated soft-close brings it back home quietly at the end of the stroke. A matching base plate, sold separately, completes the installation on the cabinet side.
The hinge body is zinc, chosen for the dimensional precision and corrosion resistance the J160-D22 series demands across its full travel range. The Nickel finish is the right call when a project's pulls, knobs, and other hardware already run in nickel or brushed silver tones, keeping the concealed hardware aligned with the visible pieces even if a door is open. At 55 lb per pair, this hinge handles most solid-wood cabinet doors without reservation. For heavier doors, confirm the load against the manufacturer's table before specifying.
This hinge suits designers who are building out a nickel hardware scheme and need a wide-opening concealed hinge that fits into that palette without a finish mismatch. It also serves cabinet shops and installers working on kitchen base cabinets, entertainment centers, or library cabinetry where the 160-degree swing solves a real access problem that a standard hinge cannot. This is an indoor application: the J160-D22 is engineered for interior cabinetry. Note that this is a specialty hinge, so confirm the cup diameter, bore pattern, and compatible plate from Sugatsune's J160-D22 series documentation before laying out the door and cabinet boring, since Sugatsune's bore specifications differ from the standard 35mm cup and 45mm pattern common in the broader concealed-hinge market.
Yes. The hinge body bores into the door and connects to a base plate mounted on the cabinet side. The plate is sold separately and should be matched to the J160-D22 series from Sugatsune.
The J160-D22 is engineered specifically for wide-angle applications where the door needs to fold back close to flat. Standard 110-degree hinges block access to part of the opening; 160 degrees clears it nearly entirely.
Mechanically both versions are the same hinge, but mixing finishes on a single run will produce a visible mismatch if any hinge is seen when a door is open. Most designers keep one finish consistent across a run.
Not necessarily. Sugatsune's J160-D22 series is a specialty hinge line and may use different bore dimensions. Confirm the cup diameter and hole spacing from the Sugatsune J160-D22 series documentation before boring doors, especially for replacements or retrofits into existing hole patterns.
Specify the J160-D22 in Nickel when the project calls for wide door clearance, a quiet close, and hardware that holds together with the rest of the room's nickel palette.
Sold In: 1 Each
