Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
wood veneer edgebanding pre-glued ash is a FormWood edge banding that covers exposed edges with ash wood, so panels present a finished, professional look. The web description states this is wood veneer edgebanding, which means the visible surface is real wood, useful wherever a natural ash appearance is required along cabinet or furniture edges. The product data notes it is pre-glued, so adhesive is already applied to the back, helping streamline edge application and reduce separate glue steps. The description specifies an ash species, giving a light-toned wood appearance that matches ash sheet goods in shops or millwork settings. The stated 13/16 inch width is sized to cover common 3/4 inch material with room to trim, helping installers achieve a flush edge after banding. The 250 foot roll length supports longer runs or multiple cabinet pieces from a single roll, which helps keep jobs moving without frequent material changeover.
The web description confirms this FormWood edge banding is 0.034 inch thick, so the banding sits close to the panel face and helps limit the amount of edge trimming required after application. The stated 13/16 inch width works well over standard 3/4 inch panels, leaving a small margin that can be trimmed flush for a straight, even edge. Because the product is pre-glued, the adhesive is already on the backside of the ash veneer, enabling heat activation during installation, which supports consistent bond lines along cabinet or furniture edges. The 250 foot roll format supports handling longer pieces in one pass, reducing edge joints and aiding a smoother workflow on repetitive shop projects.
The product data defines this item as wood veneer edgebanding in ash, placing it firmly in the edgebanding and surfacing category for woodworking. The ash species identified in the description suits projects where ash-faced panels or components need matching edges, such as cabinet boxes, shelving, or casework. The 13/16 inch width works with common sheet goods in woodworking, giving enough coverage across the edge to allow trimming without exposing core material. The 0.034 inch thickness supports edge treatment that feels close to the surface of typical ash veneer panels, so transitions at the edge stay subtle once sanded and finished. With 250 feet per roll as stated, shops can edge multiple cabinets, runs of shelving, or a full set of furniture parts without switching rolls, which supports consistent appearance from piece to piece.
The manufacturer part number PGASH13/16 and the repeating 13/16 inch dimension in the web description clearly tie this product to a specific width, supporting predictable trimming results once set into a workflow. The pre-glued construction described means the adhesive layer is uniform across the entire 250 foot roll, helping installers produce an even bond line from one end of a panel to the other. The 0.034 inch thickness noted in the description results in a relatively thin veneer edge, which reduces the material removed during trimming and sanding while still presenting a true ash wood face. Because the banding is identified as wood veneer edgebanding, it aligns with standard cabinet and furniture shop processes that expect a real-wood surface at the edge, simplifying finishing steps alongside ash-veneered panels. The ash species and continuous 250 foot length work together to keep color and grain character consistent along many linear feet of cabinet or furniture edges, supporting a coordinated finished appearance on larger projects.
PGASH13/16 is a FormWood wood veneer edgebanding in ash, so it covers exposed panel edges with real ash wood for a coordinated look with ash-faced components.
This ash wood veneer edgebanding is specified at 13/16 inch wide, providing coverage over standard 3/4 inch panels with extra width for trimming to a flush edge.
The web description lists the FormWood edgebanding at 0.034 inch thick, giving a thin veneer edge that trims easily while still presenting a real ash wood surface.
The roll length is stated as 250 feet, which supports edging multiple cabinets, shelves, or furniture parts from one continuous roll for consistent appearance.
This ash wood veneer edgebanding is described as pre-glued, so adhesive is factory-applied on the back and activated during application to bond to panel edges.
The ash wood veneer edge banding fits cabinet, furniture, or casework projects using ash-faced panels, where exposed edges need a matching ash appearance.
The web description shows this FormWood wood veneer edgebanding as pre-glued ash in a 0.034 inch thick, 13/16 inch wide profile on a 250 foot roll, aligning well with cabinet and furniture projects using ash-faced sheet goods. The combination of real ash wood veneer, pre-applied adhesive, and a width sized for common 3/4 inch panels supports efficient edge finishing across runs of casework and shelving. For jobs calling for a matching ash edge on exposed panel sides, this PGASH13/16 roll from Wurth Baer Supply offers a defined size and construction that fits established shop processes.
Sold In: 1 Roll