Wood Veneer Edgebanding Beech from FormWood is a beech wood veneer edge banding that finishes exposed panel edges so cabinets and furniture present a uniform beech surface. The 0.022 inch thick profile gives a true veneer edge that blends visually with typical beech faces, which supports a consistent appearance across doors, drawer fronts, and casework sides. The 7/8 inch width covers common panel thicknesses while giving a little trim margin, which helps during flush trimming and sanding. Supplied as a 500 foot roll, this edge banding supports longer runs and repeat projects without frequent changeovers, which can streamline production on the bench or in the shop. The steamed beech material referenced in the description points to a beech tone suited to projects that call for steamed beech faces, which keeps color targeting straightforward when selecting matching sheet goods.
The SAP description notes a fleece non-glued steamed beech configuration, which points to an edgebanding designed to be used with a separate adhesive system, important for shops that run dedicated gluing equipment. The non-glued format lets installers select an adhesive process suited to their machinery and workflow, which can support consistent bond quality across different substrates. The fleece backing called out in the description identifies a backing layer under the beech veneer, which is relevant for how the banding behaves when pressed onto panel edges and later trimmed. Because the banding is supplied as a roll, it feeds well into edge banding machines or manual setups where continuous length reduces handling, which supports steady production on both short and long cabinet runs.
This wood veneer edgebanding, beech, 0.022 inch thick and 7/8 inch wide, suits panel edges that need a beech face so exposed edges read as beech rather than core. The beech species listing supports use alongside other beech components, which is useful when building coordinated casework or furniture grouped around beech fronts and frames. The 7/8 inch dimension allows application on common panel sizes while leaving edge overhang, which gives room for trimming to a crisp line along both faces. The 500 foot roll format lets shops edge long runs of panels in a single setup, which can improve throughput when a project calls for repeated cabinet carcasses or shelving with the same edge detail.
The 0.022 inch thickness is thin enough to work as a veneer layer yet substantial enough to register as a real wood edge, which helps edges accept typical finishing steps used on beech. The fleece non-glued steamed beech description indicates a backing and surface structure tailored to separate adhesive application, which allows consistent feed characteristics when matched with edge banding machinery set up for fleece-backed material. The manufacturer part number NGBES7/8 and the description 7/8 FLEECE NON-GLUED STEAMED BEECH give a precise identity, which simplifies reordering the same edging so repeat jobs keep the same thickness, width, and material. With the FormWood brand and the wood veneer edgebanding, beech wording, shops can log this as a defined beech edge solution, which supports predictable results whenever a project calls for matching beech edges.
This product is wood veneer edgebanding in beech, which provides a genuine beech wood surface on panel edges so the finished edge reads as beech instead of exposed core.
The edgebanding is 0.022 inch thick, which creates a thin veneer layer that blends with beech faces while still behaving like wood during trimming and finishing steps.
The NGBES7/8 edgebanding roll is 7/8 inch wide and 500 feet long, which suits standard panel thicknesses and supports longer cabinet or furniture runs in one continuous supply.
The description 7/8 FLEECE NON-GLUED STEAMED BEECH indicates a steamed beech veneer with a fleece backing and no pre-applied adhesive, suited to separate adhesive application systems.
This wood veneer edgebanding is manufactured by FormWood, which helps shops track the material by brand and align it with other FormWood veneer components.
The manufacturer part number is NGBES7/8, which identifies this specific 0.022 inch thick, 7/8 inch wide, fleece non-glued steamed beech edgebanding roll for consistent reorders.
Choose this FormWood wood veneer edgebanding, beech, 0.022 inch thick and 7/8 inch by 500 foot roll when a project calls for beech edges that visually align with beech faces. The steamed beech description and fleece non-glued structure define a clear product profile, which supports planning around a separate adhesive process and repeatable machine setup. The defined manufacturer part number NGBES7/8 lets you specify the same edging for future runs, which keeps cabinet or furniture lines consistent across multiple jobs.
Sold In: 1 Roll