Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
wood veneer edgebanding pre-glued beech from FormWood provides a beech wood veneer edge banding solution that finishes exposed panel edges in a matching wood look, which helps cabinet and furniture projects present a continuous, professional appearance. The 0.034 inch thick construction delivers a substantial veneer layer that covers raw substrate edges, supporting a more solid feel at the edge line. A pre-glued backing is applied at the factory, so the bonding layer is already on the material, simplifying the edge banding step by removing the need to apply separate adhesive. The 13/16 inch width is sized for standard panel thickness coverage, giving enough overhang to trim flush after bonding for a clean, straight edge. Supplied in a 250 foot roll, this continuous length supports longer production runs or multiple small jobs from a single roll, which helps streamline shop workflow. The steamed beech material matches beech applications where a beech veneer edge is required.
This FormWood wood veneer edgebanding uses a pre-glued backing across the 13/16 inch width, so the adhesive layer is already applied to the rear of the strip and is ready to be activated during installation. The 0.034 inch thickness gives a veneer layer that responds well to trimming after bonding, which supports clean final sizing along doors, drawer fronts, and case edges. The 250 foot continuous roll format allows long, uninterrupted runs of edging along panels, which reduces stops and starts when banding tall cases or multiple parts in sequence. Steamed beech veneer on the face presents a consistent beech species surface along the edge, which helps finished components match beech fronts or veneer panels.
This wood veneer edgebanding, pre-glued, beech, 0.034 inch thick, 13/16 inch x 250 foot roll is suited to applications that require a beech veneer edge on exposed panel sides. The FormWood edge banding class as wood edge banding positions it for use on cabinets, casework, shelving, and other assemblies where panel edges remain visible and need to visually match beech faces. The 13/16 inch width supports use on panels near three-quarter inch nominal thickness, as the extra width allows trimming to a precise alignment with the panel faces. The steamed beech veneer surface ties in with beech components identified as steamed beech, which is useful when a project specifies that particular beech appearance for both faces and edges.
The pre-glued construction of this FormWood beech edgebanding means the adhesive is already evenly applied from the factory, promoting uniform bonding coverage along the entire 250 foot roll. This consistency can help reduce variations in bond quality that might occur when adhesive is applied separately. The 0.034 inch thickness gives an edge that can be trimmed and lightly finished after application, so edges can be brought flush and smoothed without cutting through the veneer too quickly. As an edge banding in roll form, it lets installers run a continuous strip along long case sides or multiple parts cut from the same sheet, which supports visual continuity from piece to piece. The combination of steamed beech veneer, pre-glued backing, 13/16 inch width, and 250 foot length offers an integrated set of details that align with repeatable edging work on beech-based projects, helping maintain uniform appearance across an entire job.
This FormWood edge banding is wood veneer edgebanding in beech, so it provides a real beech veneer surface along exposed panel edges.
This beech wood veneer edgebanding is 0.034 inch thick, giving a substantial veneer layer that can be trimmed and finished at the edge.
This PGBES13-16 FormWood roll is 13/16 inch wide and 250 foot long, covering typical panel edges and supporting longer production runs.
The pre-glued backing places adhesive on the rear of the strip, so installers activate the glue during application rather than applying separate adhesive.
Steamed beech indicates the veneer is identified as steamed beech, which helps match projects that specify this particular beech veneer look.
This FormWood PGBES13-16 roll is classified as edge banding in the edgebanding, wood category, indicating its role as wood veneer edging material.
The FormWood wood veneer edgebanding, pre-glued, beech, 0.034 inch thick, 13/16 inch x 250 foot roll PGBES13/16 delivers a steamed beech veneer edge with factory-applied adhesive ready for activation. The 13/16 inch width and 0.034 inch thickness work together to provide coverage and trim allowance suited to typical panel edges, while the 250 foot roll length supports both shop production and detailed project work. For beech-based cabinets, casework, or furniture that call for a matching beech edge, this FormWood edge banding from Wurth Baer Supply aligns product identity, dimensions, and veneer species in a single, job-focused solution.
Sold In: 1 Roll