Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Wood Veneer Edgebanding Fir 7/8 describes a FormWood edge banding that uses Fir wood veneer to finish exposed panel edges, so cabinet and furniture projects carry a consistent species appearance from face to edge. The 0.022 inch thickness provides a true wood layer that can be trimmed and flushed to the panel, keeping edges visually solid rather than showing core material. The 7/8 inch width gives working room on typical 3/4 inch panels, allowing installers to trim back to a crisp line without risking a shy edge. A 500 foot roll supports longer runs or multiple jobs from one part number, which can reduce changeovers during production runs. The NGFIR7/8 designation identifies this specific Fir veneer option in the FormWood line, which helps shops repeat an established material choice across projects.
The SAP description notes fleece non-glued Fir, indicating this veneer edgebanding lacks a pre-applied adhesive layer, so it is suited to processes that use separate glues or edge-banding machinery. The non-glued format gives shops control over adhesive choice and spread rate, which can align with existing bonding workflows or environmental conditions. The fleece backing on the veneer supports the glue bond line along the panel edge, helping adhesive wet into the back of the banding for consistent hold. That backing also stabilizes the thin Fir veneer during handling and trimming, reducing the tendency of the wood layer to split at the glue line when edges are cut flush.
This wood veneer edgebanding, Fir, 0.022 inch thick, 7/8 inch x 500 foot roll is suited to edge-finishing tasks on Fir-faced sheet goods, so visible edges follow the same grain and color family as the panel faces. The 7/8 inch width pairs effectively with many 3/4 inch engineered wood panels used in cabinets and casework, giving enough overhang to trim both faces cleanly. Because it is supplied on a 500 foot roll, this Fir veneer option can serve both small runs and ongoing shop work without frequent material changes, which keeps edge processes consistent from part to part. The FormWood branding on this edge banding identifies it as part of a wood-focused surfacing line, which fits naturally into woodworking production that already standardizes on veneer-faced materials. The NGFIR7/8 part number aligns all of these traits - Fir species, veneer construction, 0.022 inch thickness, 7/8 inch width, and roll length - into a single repeatable selection.
The 0.022 inch thick veneer on this edge banding defines how the material behaves under trimming knives and flush routers, providing a real wood face that can be eased or slightly profiled while keeping the Fir appearance intact. The fleece non-glued construction interacts with adhesive during application, allowing glue to flow into the backing instead of sitting only on the surface, which supports a more even bond line around cabinet and furniture edges. The 7/8 inch width gives installers extra tolerance for minor panel thickness variation, so a clean Fir line can be maintained even if panels run slightly heavy or light from nominal 3/4 inch. The 500 foot roll format delivers uninterrupted footage for batch work, which helps maintain the same grain character and thickness response across a large set of parts cut from one roll. The Fir species veneer contributes a consistent appearance when edging Fir or similar-toned faces, reducing visual transitions where panels meet doors, drawer fronts, or end panels.
NGFIR7/8 is a FormWood wood veneer edgebanding, Fir, 0.022 inch thick in a 7/8 inch x 500 foot roll, used to finish exposed panel edges with a Fir wood appearance.
The 0.022 inch thick veneer provides enough Fir wood material for flush trimming and light sanding, helping edges stay solid and visually consistent with the panel face.
The 7/8 inch width covers typical 3/4 inch panel edges with extra overhang, giving room to trim both faces and leave a clean Fir edge without revealing the core.
Fleece non-glued Fir edgebanding has a fleece backing and no pre-applied adhesive, so it works with separate glue systems that bond through the backing layer to the panel edge.
The 500 foot roll length supplies substantial footage from one NGFIR7/8 part number, supporting longer runs or multiple projects without frequent edge banding changes.
The Fir species veneer gives exposed edges a Fir wood look, so cabinets, casework, and furniture show a consistent species from face panels through all visible edges.
This Wood Veneer Edgebanding, Fir, 0.022 inch thick, 7/8 inch x 500 foot roll provides a defined way to finish Fir-faced panel edges with a matching veneer surface. The combination of Fir species, 0.022 inch veneer thickness, 7/8 inch width, and fleece non-glued construction gives shops a repeatable edge solution that works with separate glue processes and common 3/4 inch panel work. Using the NGFIR7/8 part number ties purchasing and production to the same FormWood Fir edgebanding each time, supporting uniform edge appearance across cabinets, furniture, and casework runs.
Sold In: 1 Roll