Wood veneer edgebanding pre-glued fir gives cabinets and panels a matching wood edge using FormWood veneer, so exposed core edges can be covered with real fir for a consistent appearance. The 13/16 inch width provides coverage for common panel thicknesses with a small overhang that can be trimmed, supporting clean, straight finished lines. The 0.034 inch thickness creates a veneer edge that is substantial enough for typical woodworking use while staying easy to work and trim. A pre-glued backing lets the installer apply heat-activated adhesive already on the banding, which streamlines workflow by removing a separate glue-spreading step. The 250 foot roll length supplies continuous material for longer runs or multiple cabinets, helping reduce seams on projects and limiting downtime for roll changes.
This wood veneer edgebanding is pre-glued, so the adhesive is already on the backside of the fir veneer and is activated by heat during installation, which simplifies application compared with loose adhesive methods. The 13/16 inch width edges common panel sizes used in casework or shelving, leaving material that can be trimmed flush after bonding to reach a smooth edge. With its 0.034 inch thickness, the FormWood veneer responds well to typical shop trimming tools once adhered, supporting clean finishing passes. The 250 foot roll format keeps material available for continuous edging runs, helping maintain consistent application conditions across a full job.
The FormWood wood veneer edgebanding in fir is suited to projects where exposed panel edges need to visually match fir-faced surfaces, such as cabinetry, casework, or custom furniture components. Its 13/16 inch width aligns with common panel dimensions, so it works naturally along cabinet sides, shelves, and tops that use similar thickness material. The 0.034 inch thickness gives an edge profile appropriate for typical woodworking environments, supporting repeated handling during shop fabrication. Because the edgebanding is supplied in a 250 foot roll, it supports small to medium production runs where multiple parts require the same fir edge treatment. The pre-glued backing helps keep application consistent from piece to piece, since the adhesive layer is uniform across the full roll length.
The PGFIR13/16 designation identifies this FormWood edgebanding as a specific 13/16 inch wide fir veneer with pre-glued backing, so installers can match this same configuration when repeat work or repairs are needed. The 0.034 inch thickness remains steady along the roll, which helps trimming tools cut a predictable edge for consistent results from part to part. Using fir veneer for the facing lets cabinetmakers keep grain and color in the fir family along door fronts and panel edges, supporting a unified finished appearance. The 250 foot length means the same roll can often carry an entire job, which helps visual continuity because all edges draw from the same veneer run. The pre-glued adhesive layer on the back keeps bonding conditions similar across all pieces that are edged from this product.
This product is a wood veneer edgebanding in fir, so the visible edge presents real fir wood to match fir-faced panels in cabinet or furniture projects.
The edgebanding is 13/16 inch wide, giving coverage across typical panel thicknesses with enough material for flush trimming along cabinet and shelving edges.
The wood veneer edgebanding is 0.034 inch thick, providing a workable veneer edge that still trims cleanly with standard edging tools in the shop.
The wood veneer edgebanding uses a pre-glued backing, so heat activation bonds it to the substrate, removing a separate glue application step from the workflow.
This FormWood fir veneer edgebanding is supplied as a 250 foot roll, supporting longer continuous runs and multiple workpieces on a single project.
The manufacturer part number PGFIR13/16 identifies a FormWood pre-glued fir wood veneer edgebanding in a 13/16 inch width for consistent product selection.
The FormWood wood veneer edgebanding pre-glued fir, 0.034 inch thick in a 13/16 inch width, gives projects a matching fir edge that aligns with common panel sizes. With a 250 foot roll length and pre-glued backing, it supports efficient edging across cabinets, shelves, or casework that specify fir veneer. Choosing the PGFIR13/16 variant keeps dimensions, material, and adhesive style consistent from job to job when the same edging look and workflow are required.
Sold In: 1 Roll