FormWood Fir Wood Veneer Edgebanding 7/8", Pre Glued, Unfinished, 250', PGFIR7/8

Wood Veneer Edgebanding For Clean Fir Edges

Wood Veneer Edgebanding in fir gives cabinet and furniture projects a real-wood edge that visually matches fir surfaces, helping jobs finish with a consistent appearance from face to edge. The FormWood brand identifies this roll as a wood veneer edgebanding, so it is built specifically to finish exposed panel edges. The 0.034 inch thickness provides a veneer profile that covers substrate edges while keeping a low build at the corner, which supports smooth transitions during finishing work. The 7/8 inch width gives coverage over common panel thicknesses while leaving working margin for trimming, so edges can be flushed and detailed without exposing the core. A pre-glued backing is applied to this edgebanding, so heat-activated adhesive is already on the strip for straightforward bonding in the shop. Supplied as a 250 foot roll, this product supports edging longer runs or multiple cabinets from a single coil.

Key Wood Edgebanding Details That Support Workflow

• The FormWood Wood Veneer Edgebanding identity defines this as a dedicated edging product, so it suits finishing exposed panel edges in cabinetry and woodworking where a fir look is required.
• The pre-glued backing means adhesive is already on the fir veneer strip, so installers can apply heat to bond edges without separate glue steps, which streamlines edging operations.
• The 0.034 inch thick construction creates a veneer layer that covers substrate edges while staying trim-friendly, supporting clean profiling, scraping, and sanding at corners.
• The 7/8 inch width provides coverage beyond typical panel thicknesses, giving extra material to trim back for tight, flush edges on cabinet sides, doors, and shelves.
• The 250 foot roll format supplies a continuous length of fir veneer edgebanding, which supports edging multiple components or longer runs with consistent appearance from a single lot.

Edgebanding Size And Pre-Glued Bonding Details

This FormWood Wood Veneer Edgebanding, fir, is specified at 0.034 inch thick, which shapes how the edge profiles during trimming and sanding, keeping the transition from face to edge manageable. The 7/8 inch width gives extra coverage beyond standard sheet goods, allowing installers to align the strip and then trim both faces back to the panel for a clean, square edge. Being pre-glued, the adhesive layer is already applied to the back of the veneer, so bonding is achieved by activating this glue with heat, helping maintain a consistent glue line along the full 250 foot roll.

Using Fir Wood Veneer Edgebanding In The Shop

Where Fir Wood Veneer Edgebanding Fits Best

This FormWood Wood Veneer Edgebanding in fir is designated for edgebanding and surfacing applications, placing it directly in cabinet and woodworking projects that need real-wood edged panels. The fir veneer face lets edges visually coordinate with fir-faced sheet goods, so finished sides, doors, and shelving can carry a matching appearance. The 7/8 inch width works across many panel thicknesses common in shop builds, creating enough overhang on both sides of the panel edge for trimming without exposing the substrate. With 250 feet on a roll, a single coil can handle edging for multiple cabinets or a full set of casework, so runs within a project stay consistent in species and thickness. Because this product is in the edge banding class, it is intended specifically for covering raw panel edges where a wood look is required.

Details That Help Achieve Consistent Edge Results

The 0.034 inch thickness of this fir Wood Veneer Edgebanding sets the working profile at the corner, so scraping and light sanding can blend the edge into adjacent surfaces without a bulky step. The pre-glued construction places the adhesive on the strip from the factory, so heat activation bonds the veneer evenly along its length and supports a continuous glue line. The 7/8 inch by 250 foot specification means every piece cut from the roll shares the same width and thickness, helping jigs, trimmers, and sanding routines stay consistent from part to part. With the manufacturer part number PGFIR7/8 clearly identified, shops can match this exact FormWood edgebanding across repeat jobs, helping future orders duplicate color species and dimensions for repairs or additions.

Common Questions About FormWood Fir Edgebanding

Select Fir Edgebanding That Matches Your Project

This FormWood Wood Veneer Edgebanding in fir, 0.034 inch thick and 7/8 inch wide, offers a pre-glued option for finishing panel edges with a matching wood face. The 250 foot roll length supports both small and larger cabinet runs from one product. For projects using fir-faced sheet goods where real-wood edges are required, this PGFIR7/8 edgebanding supplies a defined thickness, width, and species that support repeatable trimming and finishing routines across the job.