FormWood Mahogany PSA veneer sheet gives you a 48 by 96 inch wood veneer surface with a pressure sensitive adhesive back, so you can cover panels or components in a single, continuous sheet. The mahogany face provides a consistent wood look on cabinets, fixtures, or furniture parts where a solid-wood appearance is needed across a larger area. The quartered cut face described as QTD CUT in the product data delivers a straight, linear grain pattern that helps projects read clean and uniform from piece to piece. The A GRD designation in the description identifies an A grade face, which supports use on visible cabinet ends, doors, or fronts where appearance matters. With the PSA back described in the product information, this sheet is designed for adhesive-backed application instead of contact cement, which can streamline veneer work on flat substrates.
This PSA back wood veneer sheet is identified as a FormWood product in the name, tying it to the FormWood veneer line used in woodworking and cabinet work. The pressure sensitive adhesive back described in the product name and SAP description is designed for adhesive-backed installation rather than raw wood bonding, which can simplify applying veneer to cabinet-grade sheet goods or prepared substrates during fabrication. The 48 inch by 96 inch dimensions allow fabricators to work with full-size panels, so layout, cutting, and trimming can follow typical 4 by 8 sheet workflows in the shop. With the A grade, quartered mahogany face, this veneer sheet is positioned for visible surfaces in cabinets, furniture, or architectural casework where a linear grain appearance is important.
The 48x96 mahogany PSA veneer format aligns with common cabinet and millwork panel sizes, so shop layouts can treat this sheet much like other 4 by 8 sheet goods during cutting and sizing. The PSA back referenced in the product information is suited to adhesive-backed application, which means the veneer layer is already prepared with a pressure sensitive adhesive instead of requiring a separate glue spread for bonding. The mahogany species noted in the name supports projects that call for a warm-toned wood face, allowing casework, doors, or panels to carry a consistent mahogany look within a space. The A grade face indicated by A GRD helps when selecting material for high-visibility fronts, because the grading is intended for cleaner, more uniform surfaces on show faces in cabinetry or furniture.
The quartered cut QTD CUT description identifies a slicing method that produces a straighter grain pattern on the veneer face, which helps banks of doors, drawer fronts, or tall panels line up visually when assembled. This straighter grain can also support more predictable layout when matching adjacent parts from the same 48 by 96 inch sheet, improving visual continuity in the run. The A grade face called out as A GRD in the description indicates a higher appearance grade suited to primary viewing surfaces, so installers and fabricators can reserve this sheet for areas that draw the most attention. Because the product is classified as a wood veneer sheet within the Edgebanding & Surfacing category, it fits naturally into workflows that combine veneer work with other surfacing materials from the same supply channel.
The FormWood Mahogany PSA veneer sheet is identified as 48 by 96 inches, allowing coverage of standard 4 by 8 panels in a single piece for continuous wood grain on larger components.
This wood veneer sheet is described as PSA back, indicating a pressure sensitive adhesive layer on the back that supports adhesive-backed application on appropriate flat substrates during fabrication.
The MAAQR38RB4E veneer sheet is identified as mahogany, giving projects a mahogany wood appearance suited to cabinets, furniture, or casework needing that specific species look.
The description notes QTD CUT, indicating a quartered cut grain that produces a straighter, linear pattern for more uniform alignment across doors, panels, or drawer fronts.
The A GRD reference indicates an A grade face, positioning this veneer sheet for visible cabinet and furniture surfaces where a cleaner, more consistent appearance is desired.
This product is classified as a wood veneer sheet in the Edgebanding & Surfacing category, aligning it with other veneer and surfacing options used in woodworking projects.
The FormWood Mahogany PSA veneer sheet identified as MAAQR38RB4E combines a 48 by 96 inch format, PSA back, and A grade quartered mahogany face, giving you a defined option when specifying veneer for visible cabinet or furniture surfaces. The product name and category classify it as a wood veneer sheet for surfacing work, so it fits into projects that rely on sheet-based fabrication. For jobs that call for a consistent mahogany appearance with a pressure sensitive adhesive back, this sheet offers a clearly identified choice within Wurth Baer Supply offerings.
Sold In: 1 Each