Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
FormWood Mahogany PSA veneer sheet is a 24 inch by 96 inch wood veneer sheet designed for surfacing projects where a mahogany face is required. The FormWood brand identifies this sheet as part of a dedicated wood veneer sheet line, which matters when spec consistency across a job is important. The product is categorized as a wood veneer sheet, so it serves as a surfacing layer rather than a structural panel, helping you finish visible faces while using other cores behind it. The sheet uses a PSA back construction referenced in the description, meaning the back is configured for pressure-sensitive adhesive application, which streamlines lamination steps compared to manually spreading glue. The 10MIL/PSA reference in the description ties the sheet to a flexible veneer backing thickness, supporting use on flat panel faces in typical woodworking environments. The A grade reference in the description identifies a higher face-grade selection, which matters when the mahogany surface will remain exposed in finished cabinetry or fixtures.
This FormWood wood veneer sheet uses a PSA back construction described as 10MIL/PSA, which sets it up for pressure-sensitive adhesive application to a substrate. That configuration matters because it aligns with workflows that rely on adhesive-backed veneer rather than contact cement spread on both faces. The 24 inch by 96 inch size defines the maximum single-piece coverage you can achieve on a panel, which directly affects layout planning and cut lists for cabinet sides, doors, and casework components. The wood veneer sheet classification means it is intended to be laminated onto a base material, so the sheet functions as the visible mahogany face in your build while the substrate carries structural loads.
This FormWood mahogany wood veneer sheet belongs in projects that call for a real-wood mahogany face on fabricated panels. The 24 inch width works well on cabinet sides, end panels, and partitions that fall within that dimension, avoiding extra joints in the visible field. The 96 inch length lets you span tall panels or rip multiple shorter pieces, which matters when matching face material across doors, drawer fronts, or fixture components. As a wood veneer sheet, it is positioned for use in cabinetry, furniture, and interior millwork where a consistent mahogany appearance over engineered cores is required. The A grade designation in the description indicates a higher face selection, aligning this sheet with applications where the surfacing layer will be the finished show face.
The 10MIL/PSA backing configuration stabilizes the mahogany veneer while keeping it thin, which supports predictable handling during layout and lamination. That backing thickness matters because it helps the sheet conform to flat substrates while still behaving as a controlled veneer product rather than loose raw leaf. The PSA back reference signals that the adhesive-ready backside is central to the workflow, letting you position and bond the sheet in line with pressure-sensitive adhesive practices. The 24 inch by 96 inch format creates a known coverage footprint, so repeated cabinet or panel sizes can be planned around that module for efficient cutting and minimized waste. Pairing the FormWood brand with the MAAPN38RB2F manufacturer part number gives you a specific identity to repeat across bids and reorders, which supports finish consistency when the same mahogany face is required on additional work.
The MAAPN38RB2F designation identifies a FormWood mahogany wood veneer sheet, so it serves as a surfacing layer over your chosen substrate rather than a structural panel.
The veneer sheet measures 24 inches by 96 inches, which lets you cover common cabinet sides and taller panels with a single mahogany face where the size fits.
The PSA back construction configures the sheet for pressure-sensitive adhesive bonding, which streamlines lamination steps compared to applying separate liquid adhesive on both faces.
The 10MIL reference indicates a thin, flexible backing on the veneer, helping the mahogany layer conform to flat substrates while maintaining a controlled surfacing thickness.
This product is categorized as a wood veneer sheet in the edgebanding and surfacing group, so it is designed specifically to provide the visible mahogany finish layer.
The A grade notation in the description identifies a higher face-grade selection, making this sheet suited to exposed mahogany surfaces on cabinetry or fixtures.
The FormWood Mahogany 24 inch by 96 inch PSA back wood veneer sheet delivers a defined mahogany face size, a 10MIL/PSA backing configuration, and an A grade face as referenced in the description. Those specifics let you align panel layouts, face quality, and pressure-sensitive adhesive workflows to a known, repeatable product when surfacing cabinets, furniture, or interior fixtures with a consistent mahogany appearance.
Sold In: 1 Each