FormWood mahogany veneer sheet gives you a 24 inch by 96 inch wood veneer surface, so you can cover cabinet sides, doors, or panels in a single run without seaming smaller pieces. The PSA back wood veneer sheet uses a pressure sensitive adhesive backing, which allows you to bond the veneer directly to a properly prepared substrate using firm pressure instead of separate wet-applied adhesive systems. The 10MIL PSA construction identified in the SAP description as 2X8 10MIL/PSA 9505 helps keep the sheet flexible during handling while maintaining enough body for flat application on casework, millwork, or fixture panels.
The PSA back wood veneer sheet format means the bonding layer is pre-applied to the back of the FormWood mahogany veneer sheet, so application becomes a position-and-press step once the substrate surface is ready. The 10MIL backing construction described in the SAP text supports controlled flexibility during handling, which helps when maneuvering the 24 inch by 96 inch sheet onto cabinet sides, tall end panels, or long shelving runs. The 2X8 dimension noted in the SAP description matches the 24 inch by 96 inch size in the product name, which helps with layout, cut planning, and yield estimates for edgebanding and surfacing runs on common casework heights.
The 24 inch by 96 inch size of this FormWood mahogany veneer sheet aligns well with typical cabinet and millwork proportions, so one sheet can face many end panels or tall partitions without horizontal seams. Being in the Edgebanding & Surfacing category under wood veneer sheets ties this product to tasks like resurfacing cabinet ends, finishing the exposed sides of built-ins, or veneering fixture panels where a thin decorative surface is needed over a stable core. The PSA back wood veneer sheet design, called out directly in the product name, supports workflow on shop-built components that benefit from adhesive already integrated with the veneer. The mahogany designation in both the product name and SAP description anchors this sheet to jobs that require a mahogany wood face, such as matching existing mahogany casework or building new runs of mahogany-fronted cabinets.
The 2X8 10MIL/PSA 9505 AFR MAHOG COMM GRD wording in the SAP description provides a compact summary of dimensions, backing type, and mahogany commercial grade, which helps set repeatable expectations for coverage, handling, and face quality from job to job. The pressure sensitive adhesive backing referenced by PSA back reduces variation in glue spread, because the adhesive layer is applied during manufacturing rather than in the shop, which supports more uniform bonds across multiple parts. The 10MIL backing identified in the SAP description influences how the veneer behaves during trimming and edge clean-up, giving installers a consistent feel as they flush edges on cabinet sides or door faces. The manufacturer part number MAAPN28RB2F gives a precise identifier for this specific FormWood wood veneer sheet, which helps shops reorder the same configuration when expanding a mahogany project or replacing damaged surfaced panels.
The FormWood mahogany veneer sheet is 24 inches by 96 inches, giving a 2 foot by 8 foot coverage area for surfacing cabinet panels or similar casework parts.
The PSA back wood veneer sheet description indicates a pressure sensitive adhesive backing on the veneer, so bonding occurs by positioning the sheet and applying firm pressure to the substrate.
The 10MIL backing referenced in the SAP description provides a thin yet supportive base, helping the sheet flex for placement while remaining manageable during trimming and finishing steps.
The AFR MAHOG COMM GRD description points to mahogany commercial grade use, fitting cabinet, millwork, and fixture projects that call for a consistent mahogany wood face.
The 24 inch by 96 inch format can cover many cabinet sides and tall panels in one piece, reducing seams and simplifying layout on standard casework dimensions.
The MAAPN28RB2F manufacturer part number uniquely identifies this FormWood mahogany 24x96 PSA veneer sheet, supporting consistent reorders for repeat or expansion projects.
The FormWood mahogany 24 inch by 96 inch PSA back wood veneer sheet combines a 2 foot by 8 foot coverage area with 10MIL/PSA backing and commercial grade mahogany, giving shops a defined surfacing option for cabinets and millwork. The clear identifiers in the product name, SAP description 2X8 10MIL/PSA 9505 AFR MAHOG COMM GRD, and manufacturer part number MAAPN28RB2F support straightforward planning when a PSA-backed mahogany wood veneer sheet is required. Use this configuration when project drawings or standards call out FormWood wood veneer sheets in mahogany with a pressure sensitive adhesive back for edgebanding and surfacing tasks.
Sold In: 1 Each