FormWood Mahogany PSA wood veneer sheet gives you a 24 inch by 96 inch surfacing option for casework, panels, or cabinet components where a mahogany face is required. The wood veneer sheet format places this product in the Edgebanding & Surfacing category, so it suits jobs where you need a continuous face over flat substrates. The PSA back construction referenced in the 2X8 10MIL/PSA 9505 MAHOG QTD CUT A GRD description indicates a pressure-sensitive adhesive backing on a 10mil backing, which streamlines applying the veneer to prepared surfaces. The mahogany species listed in the description sets the visual tone of the installation, aligning the sheet with projects calling for a mahogany appearance across doors, fronts, or architectural panels. The wood veneer sheet classification defines this as a thin real-wood layer for surfacing rather than a structural panel.
The PSA back noted in the 2X8 10MIL/PSA 9505 MAHOG QTD CUT A GRD description means the FormWood Mahogany 24 inch by 96 inch PSA back wood veneer sheet is designed to adhere using its built-in pressure-sensitive layer, which eliminates separate glue application on compatible surfaces. The 10mil backing reference defines a thin, stable base under the mahogany face, which helps the sheet conform over flat panels during lamination. The 24 inch width and 96 inch length from the product name support full-height or multi-part layouts, which matters when planning cuts to maintain grain direction and visual flow along cabinet sides or tall end panels in a shop setting.
The FormWood Mahogany 24 inch by 96 inch PSA back wood veneer sheet, identified by manufacturer part number MAAQR38RB2F, is a wood veneer sheet within the Edgebanding & Surfacing category, so it suits projects that need a real-wood mahogany face laminated over a substrate. The 2X8 dimension called out in the SAP description gives you a 2 foot by 8 foot sheet, which aligns well with common cabinet and fixture panel sizes, letting you skin sides, ends, and door blanks from a single piece where dimensions allow. The mahogany species reference sets this sheet up for use in matching mahogany casework, doors, or trim where a consistent species is important across components. With the PSA back designation, the veneer sheet is oriented toward applications where a pressure-sensitive adhesive-backed veneer is appropriate, keeping the workflow focused on surface prep, layout, and roll-down rather than adhesive mixing or spreading.
The 10MIL/PSA note in the SAP description highlights two practical aspects of this FormWood Mahogany wood veneer sheet: the thin 10mil backing and the pressure-sensitive adhesive layer. The 10mil backing helps maintain flexibility during handling while supporting the mahogany face for clean trimming after lamination, which is important when you are working tight edges or detailed cutouts. The pressure-sensitive adhesive back focuses the installation on firm, even pressure across the 24 inch by 96 inch field, which supports uniform bonding over properly prepared, flat cores. The wood veneer sheet classification indicates a thin surfacing material rather than a thick panel, so it functions as the visible finish layer over substrates in cabinet, furniture, or fixture builds. The manufacturer part number MAAQR38RB2F ties this specific configuration to FormWood, helping you repeat the same mahogany PSA-backed 2X8 sheet on future jobs that need the same look and installation approach.
The FormWood Mahogany PSA wood veneer sheet is described as 24 inch by 96 inch, giving you a 2 foot by 8 foot surfacing area for cabinet or panel applications.
This wood veneer sheet is described with PSA back, indicating a pressure-sensitive adhesive backing so the veneer bonds using its own adhesive layer on prepared surfaces.
The SAP description lists 10mil, indicating a thin 10mil backing under the mahogany face, which supports flexibility and trimming control on flat surfacing work.
This product is classified as a Wood Veneer Sheet in the Edgebanding & Surfacing category, indicating it serves as a thin surfacing layer over suitable substrates.
The product name and SAP description reference Mahogany and MAHOG, indicating a mahogany wood face for matching projects that specify this species.
MAAQR38RB2F is the manufacturer part number for this FormWood Mahogany 24 inch by 96 inch PSA back wood veneer sheet, helping identify this exact configuration for repeat orders.
The FormWood Mahogany 24 inch by 96 inch PSA back wood veneer sheet combines a defined 2 foot by 8 foot size, a 10mil backing, and PSA back construction to deliver a mahogany wood veneer sheet suited to flat surfacing tasks. The Wood Veneer Sheets class and Edgebanding & Surfacing category positioning clarify its role as a thin finish layer over substrates rather than a structural element. When a project calls for a mahogany face with a pressure-sensitive installation approach, this FormWood sheet and its MAAQR38RB2F designation offer a repeatable choice for shop or field work.
Sold In: 1 Each