Wood Veneer Edgebanding, Pre-Glued, Maple, 0.034" Thick 7/8" x 250' Roll, PGMAP7/8

Wood Veneer Edgebanding For Clean Maple Edges

Wood Veneer Edgebanding gives cabinetmakers and woodworkers a maple veneer solution for finishing exposed edges on plywood or similar sheet goods. This FormWood product is classified as edge banding and uses a wood veneer face that visually matches maple projects, so edges read as part of the panel instead of a separate strip. The web description identifies it as pre-glued, so adhesive is already applied to the back of the veneer, which streamlines application because there is no separate glue spreading step. The edgebanding is listed at 0.034 inch thick, giving a veneer layer with enough body for light sanding and flushing without cutting through immediately in normal trimming operations. The roll width is specified as 7/8 inch, providing coverage that comfortably spans most standard 3/4 inch panel edges with a bit of overhang for trimming. A 250 foot roll length supports longer cabinet runs or multiple projects from a single stock roll.

Key Maple Edgebanding Details That Help Jobs

• The product is described as wood veneer edgebanding, so it uses real wood veneer on the face, allowing finished edges to take comparable coloring steps to surrounding maple panels.
• The material is specified as maple, which supports visual continuity on maple cabinetry or furniture where matching species helps keep door and panel edges consistent.
• The edgebanding is pre-glued, so the adhesive layer is already on the back, reducing separate gluing steps and keeping workflow focused on heating, applying, and trimming.
• The thickness is listed at 0.034 inch, which gives enough veneer depth for careful trimming and light sanding while still behaving like a thin edge treatment.
• The width is 7/8 inch, which overshoots a 3/4 inch substrate slightly and provides margin for trimming flush without risking a short reveal along the edge.
• The roll length is 250 feet, making it suitable for runs of multiple cabinets or casework pieces from a single continuous supply on the bench.

Edgebanding Dimensions That Support Straight Runs

This FormWood wood veneer edge banding uses a 7/8 inch width, which is sized to cover typical 3/4 inch sheet goods with extra material at both edges for trimming. That extra fraction of an inch helps keep coverage even when panels vary slightly or when alignment during application is not perfect. The listed thickness of 0.034 inch gives the maple veneer face enough presence for flush trimming and light sanding while retaining flexibility to follow panel edges smoothly. With a 250 foot roll length, longer cabinet banks, built-ins, or multiple small jobs can be edged from the same roll, helping layouts stay consistent from piece to piece. The classification as wood edge banding ties it directly to edgebanding and surfacing tasks, so it fits naturally into standard edge finishing steps in a woodworking shop.

Using This FormWood Maple Edgebanding In Workflows

Where This Maple Wood Veneer Edgebanding Fits

The product name identifies this as wood veneer edgebanding in maple, so it fits projects where the primary visible material is maple veneer or solid maple. The 7/8 inch width is suited to edging cabinet sides, shelves, and doors cut from 3/4 inch sheet goods that need a maple face on the edge. Its role in the edgebanding and surfacing category positions it for use on casework, furniture carcasses, and similar assemblies where raw panel cores should be hidden. Because it is supplied on a 250 foot roll, it supports production-style workflows such as multiple cabinet boxes in a kitchen or a series of built-in units, letting the same maple look carry across the full run of work.

Why Pre-Glued 0.034 Inch Stock Aids Results

The web description and SAP description both describe the edgebanding as fleece pre-glued maple, which means adhesive is pre-applied to the backing, so the installer can focus on activating that glue rather than handling liquid or cartridge adhesives. This simplifies the sequence on the bench, especially when repeating the process across many parts. The 0.034 inch thickness gives the veneer a tangible layer that responds predictably to common trimming tools, so edges can be flushed and slightly eased without immediately exposing the substrate. Being a FormWood product within the edgebanding and wood category connects it with professional woodworking environments where consistent edge appearance and efficient processing are valued. The combination of species, thickness, and pre-glued backing keeps the edging step aligned with straightforward, repeatable shop routines.

Common Questions About This Maple Edgebanding Roll

Select This Maple Roll For Consistent Edge Work

This FormWood Wood Veneer Edgebanding in maple brings species match, pre-glued backing, and 0.034 inch thickness together in a 7/8 inch by 250 foot format suited to cabinet and casework runs. The maple material helps edges align visually with maple panels, while the pre-glued construction keeps the edging step focused on applying and trimming instead of separate adhesive handling. For shops and serious DIY users working with maple-faced sheet goods, this edge banding roll from Wurth Baer Supply fits directly into standard edging sequences and supports consistent results across multiple pieces.