Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formwood Prefinished Maple Wood Edgebanding is a maple wood edge banding that finishes exposed edges on panels so cabinet and furniture projects get a consistent maple appearance across faces and edges. The FormWood brand defines it as a prefinished option, so the surface arrives already coated, which avoids separate edge finishing steps after application on jobs. This edgebanding is specified at 7/8 inch width, which gives coverage for common 3/4 inch panels while allowing slight overhang for trimming to a clean line. The maple wood construction keeps the visible edge in the same species family as maple-faced components, helping maintain visual continuity on doors, casework, and shelving. As an edge banding product, it serves wherever a raw panel edge needs a maple finish so fabricated parts leave the shop with a uniform look.
This edgebanding is specified at 7/8 inch W, giving workable overhang when applying to typical 3/4 inch panels so the excess can be trimmed back to a straight, clean edge. The product is described as No Glue, which means the back is not pre-applied with adhesive and allows the installer to choose adhesives and spread rates to match their edgebanding equipment or project method. As edge banding, it is intended to finish panel edges so the final assembly presents a continuous maple surface from face to edge. The combination of defined width and non-glued construction supports controlled fit and adhesive choice during installation.
This product is identified as Formwood Prefinished Maple Wood Edgebanding in the Edge Banding category, placing it in typical woodworking and casework applications where exposed panel edges need a maple finish. The maple construction supports use on cabinets, furniture components, and similar panel-based assemblies that use maple as the visible wood species. With its 7/8 inch W dimension, it fits edging tasks on common sheet goods used in cabinetry where the core leaves a visible edge that benefits from a matching maple band. The prefinished maple surface aligns with projects where the edge needs to leave the shop ready for service without additional maple finishing steps on the band itself.
The 7/8 inch W x 500 foot description indicates enough length for multiple parts or production runs while each applied strip still presents a manageable overhang for trimming. The defined 7/8 inch size keeps setup consistent on trimmers and edgebanders because the same over-width can be expected from roll to roll. The designation No Glue on the product description clarifies that adhesive is not pre-applied, so glue compatibility follows the installer s selected system and workflow. The prefinished maple face eliminates a separate edge finishing sequence on the edgebanding itself, which helps keep edge appearance predictable from part to part when working through a stack of components. Together, these details support repeatable results on maple-edged parts.
Formwood Prefinished Maple Wood Edgebanding uses maple wood, so the visible edge matches maple-based projects where a maple species appearance is required.
Formwood Prefinished Maple Wood Edgebanding is listed as 7/8 inch W x 500 foot, providing coverage for many linear feet of panel edging.
Formwood Prefinished Maple Wood Edgebanding is described as No Glue and non-glued, so the back is not pre-coated with adhesive.
Formwood Prefinished Maple Wood Edgebanding at 7/8 inch W leaves slight overhang on 3/4 inch material, allowing trimming to a flush, straight edge.
Formwood Prefinished Maple Wood Edgebanding is identified as prefinished, indicating the maple face arrives coated to provide a ready maple appearance.
Formwood Prefinished Maple Wood Edgebanding uses manufacturer part number NGPFMAP7/8, which ties directly to this specific 7/8 inch W non-glued maple product.
Formwood Prefinished Maple Wood Edgebanding 7/8 inch W x 500 foot No Glue provides a maple wood edge banding solution where a prefinished maple face, non-glued back, and defined 7/8 inch width support efficient edging of panel projects. When a job calls for maple edges that visually align with maple components, this FormWood edge banding delivers a consistent material, color family, and dimension. Ordering this specific NGPFMAP7/8 part keeps repeat work aligned to the same maple edgebanding across future runs.
Sold In: 1 Roll