Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Wood veneer edgebanding pre-glued white oak describes this FormWood edge banding that finishes exposed panel edges with real white oak veneer, giving plywood and composite panels a matching solid-wood look across visible edges. The Web Description and SAP Description specify white oak, so the edgebanding provides a consistent species match wherever white oak panels are used on a project. The product is 0.034 inch thick, which creates a substantial edge layer that helps visually cover core materials while staying manageable during trimming. The 13/16 inch width bridges common panel thicknesses, giving coverage across the face and a small overhang for clean flush-trimming. The 250 foot roll length supports longer runs of cabinetry or casework from one roll, helping keep grain and color more uniform across multiple pieces. The manufacturer part number PGWHO13/16 clearly identifies this specific white oak pre-glued option for ordering and reordering.
The web description identifies this FormWood product as pre-glued wood veneer edgebanding, which means adhesive is already applied to the back of the strip, ready for activation during installation. The 13/16 inch width gives extra coverage beyond typical 3/4 inch panels, allowing a small margin for precise trimming along both faces. At 0.034 inch thick, the veneer profile remains slim enough to sit neatly on panel edges while still presenting a true wood surface for final edge finishing. The 250 foot roll format supports longer, continuous runs on cabinet sides or tall panels without frequent roll changes, supporting a smoother installation sequence on shop or onsite work.
The product name and web description identify this as wood veneer edgebanding, pre-glued, white oak, in a 13/16 inch by 250 foot roll, so it aligns well with white oak cabinetry, shelving, and built-ins that need finished edges. In shop environments working with white oak-faced panels, the matching species helps keep door, drawer, and carcass edges visually tied to the main surfaces. The 13/16 inch width lets installers work confidently on standard thickness panels while maintaining some overhang for trimming, which is especially helpful on longer edges where straightness matters. Because this is a 250 foot roll, larger projects such as kitchen runs, office millwork, or banked closet systems can draw from the same roll, supporting consistent edge appearance from start to finish.
The combination of a 0.034 inch thick veneer and pre-glued backing, as listed in the web description, helps create a repeatable workflow: the thickness yields a solid wood face for the edge while staying manageable for trimming or light sanding. The pre-applied adhesive simplifies handling, since the installer works with a single wood strip rather than separate glue and tape systems, which streamlines edging passes on multiple panels. The FormWood branding and part number PGWHO13/16 give a precise identifier that fabricators can specify in project notes, helping standardize the exact white oak edgebanding used from job to job. As an edge banding product in the Edgebanding & Surfacing category, it fits naturally into cabinet shops focused on building uniform, professional-looking white oak casework.
PGWHO13/16 is a FormWood wood veneer edgebanding, pre-glued, in white oak, used to finish exposed panel edges so they visually match white oak surfaces.
The wood veneer edgebanding is 13/16 inch wide, 0.034 inch thick, and supplied in a 250 foot roll, suited to edging standard panel thicknesses on cabinet and furniture projects.
The pre-glued backing on this wood veneer edgebanding places adhesive on the strip itself, simplifying edge application and supporting a more efficient workflow on repeated panel runs.
The white oak veneer matches white oak-faced panels, so cabinet, shelf, and gable edges present a continuous species and grain character across the finished installation.
A 250 foot roll works well for multi-cabinet runs, room-scale casework, or production settings, supporting many edges from one roll for consistent white oak appearance.
The 0.034 inch thickness provides a true wood edge profile that covers panel cores while remaining straightforward to trim and finish along doors, shelves, and carcass parts.
This FormWood wood veneer edgebanding, pre-glued white oak in a 13/16 inch by 250 foot roll, offers a defined way to finish panel edges to match white oak faces. The 0.034 inch thick veneer creates a true wood edge that visually hides core materials while staying workable during trimming and finishing passes. With the PGWHO13/16 designation and clear dimensions, shops can specify this exact roll wherever white oak edge work repeats across cabinets, shelves, and built-ins. For projects built around white oak panels, this pre-glued edgebanding provides a consistent, job-ready choice for exposed edges.
Sold In: 1 Roll