wood veneer edgebanding pre-glued white oak identifies this FormWood edge banding as a real wood veneer solution with factory-applied glue, which lets you cover exposed panel edges in one heat-activated step instead of a separate adhesive application. The product name specifies white oak, so the edge surface presents a white oak appearance that matches white oak sheet goods or solid components in built-ins, casework, or furniture runs. The web description states a 0.034 inch thickness, which gives the edge a substantial veneer layer that can be trimmed and lightly sanded for a flush, finished edge without feeling fragile during handling. The description also confirms that this is wood veneer edgebanding, so it provides a genuine wood surface that can be integrated into typical woodworking finishing systems for a consistent look across faces and edges.
The web description confirms a 7/8 inch width on this FormWood wood veneer edgebanding, which gives installers a practical margin on 3/4 inch panels so the tape can be centered, bonded, and then trimmed back for a flush finish. The material is identified as pre-glued, meaning adhesive is already applied to the back of the veneer, so a heat source can be used to activate the glue directly on the panel edge without mixing or spreading separate adhesive. The stated 0.034 inch thickness provides enough veneer body for edge trimmers and knives to track accurately along the panel face, which helps maintain straight, chip-resistant edges from one piece to the next.
The product name describes this item as Wood Veneer Edgebanding, Pre-Glued, White Oak, which defines its role as a finishing edge on panel-based woodworking such as cabinets, shelving, or furniture components built with white oak faces. The 7/8 inch width stated in the web description makes it suited to edging nominal 3/4 inch boards and panels, giving enough overhang at both sides for a trimmer pass while maintaining full coverage on the core material. The 250 foot roll length described in the web information supports use on multi-cabinet installations or longer production runs, letting shops run several carcasses or shelving sections from one continuous supply. Because the category is listed as Edgebanding, Wood, the product is positioned for wood-focused shops and finishers who want a matching species edge rather than a contrasting material.
The manufacturer part number PGWHO7/8 ties directly to this specific FormWood white oak edgebanding, which helps shops reorder the same material and maintain visual continuity between projects or repeat jobs. The fleece pre-glued description in the SAP text indicates a fleece-backed structure with adhesive applied, so the backing is designed to support the glue layer and provide a stable bond when activated, helping the edge stay secure along the full length. The 0.034 inch thickness called out in the web description creates a veneer profile that can tolerate careful trimming and light sanding at the edge without quickly wearing through to the substrate, which is important when refining joints or easing sharp edges. The white oak identity ensures that when panels and edging share the same species designation, the overall assembly presents a unified wood look from face to edge, supporting a professional finish on visible cabinet fronts and open shelf ends.
The FormWood PGWHO7/8 edgebanding is described as wood veneer edgebanding in white oak, so the visible edge presents a white oak wood surface for projects using the same species.
The web description lists a 7/8 inch width, giving coverage beyond 3/4 inch panel thickness so you can bond, then trim back to a clean, flush edge.
The web description specifies a 0.034 inch thick veneer, providing enough material for trimming and light sanding while maintaining a wood surface at the edge.
The product description states a 250 foot roll length, which supports edging multiple cabinets or larger woodworking projects from a single roll.
The product is described as pre-glued and fleece, so adhesive is factory-applied to the backing, ready for heat activation along panel edges.
The brand listed is FormWood, and the manufacturer part number is PGWHO7/8, identifying this specific white oak pre-glued wood veneer edgebanding.
The FormWood Wood Veneer Edgebanding, Pre-Glued, White Oak, 0.034 inch Thick 7/8 inch x 250 foot Roll, PGWHO7/8, provides a white oak veneer edge sized for common 3/4 inch panels with pre-applied adhesive, so shops can run efficient edging on casework, shelving, and furniture built around white oak faces.
Sold In: 1 Roll