FormWood White Oak wood veneer sheet provides a White Oak surface in a 48 inch by 96 inch format, so large panels, doors, or casework faces can be skinned in a single run. This sheet belongs to the wood veneer sheets class within the edgebanding and surfacing category, so it is suited to visible surfaces where a wood look is required. The manufacturer part WHOQA28RB4C identifies this specific White Oak sheet, which supports repeat ordering when a project calls for matching veneer. The sheet uses a 20 mil construction as described in the SAP text, giving a defined veneer build that matters when planning how the sheet will behave over substrate transitions. The description also references quartered and assorted flake White Oak, so the sheet presents the characteristic quartered White Oak figure that many cabinet and millwork jobs specify.
This FormWood wood veneer sheet is supplied in a 48 inch by 96 inch format, so layout on standard sheet-goods-based cabinetry and fixtures follows familiar dimensions. Because it is a wood veneer sheet in the surfacing category, it is designed to be applied over substrates rather than used as structural material, which keeps it focused on the visible finish layer. The 20 mil build described in the product text offers a defined thickness range, which influences how the sheet handles around panel edges and corners when trimmed and finished.
The White Oak 48 inch by 96 inch wood veneer sheet format aligns with common cabinet and casework dimensions, so it fits well on tall pantry sides, wardrobe panels, and reception or conference room millwork. Being categorized under edgebanding and surfacing as a wood veneer sheet, it serves as the decorative face over an underlying core, which keeps it focused on the visible White Oak appearance rather than structural loads. The quartered and assorted flake White Oak description signals a quartered grain look, which often appears in doors, wall panels, and furniture requiring a more linear White Oak pattern. With the FormWood brand tied to this sheet, shops that already specify FormWood veneer can keep the same look across multiple components on a job. The WHOQA28RB4C part number further anchors this specific cut and species combination, so repeated orders match previous work when a client extends or refreshes an installation built around this veneer.
The 4X8 48 inch by 96 inch sizing of this FormWood White Oak veneer sheet allows full-height coverage on many standard cabinets and wall panels, which reduces seams that could distract from the quartered White Oak pattern. The 20 mil construction noted in the SAP description defines a veneer build that responds predictably during pressing and trimming, which helps installers achieve uniform edges and corners across a run of casework. Because the product is clearly classified as a wood veneer sheet in the surfacing category, it is intended to be laminated to a substrate, keeping the White Oak where it contributes most: on the exposed surfaces. The quartered and assorted flake White Oak description points to a straight-grain dominant figure, which supports consistent visual alignment from panel to panel when layout is planned around the veneer direction. Tying all of this to the WHOQA28RB4C identifier allows shops to document exactly which veneer sheet was used on a project, simplifying future replacements or additions that must visually match the original installation.
The FormWood White Oak wood veneer sheet is described as 4X8 and 48 inch by 96 inch, so it covers standard sheet-goods-based cabinet sides and panels in a single piece.
The 20 mil reference in the product description identifies the veneer build, which matters when planning how the sheet will handle during pressing, trimming, and finishing against panel edges.
The SAP description notes quartered and assorted flake White Oak, so the veneer presents a quartered, straight-grain oriented White Oak look suited to many architectural designs.
This item is classified as a wood veneer sheet within the edgebanding and surfacing category, so it is intended as a decorative surfacing layer over a separate substrate.
The manufacturer part WHOQA28RB4C uniquely identifies this specific FormWood White Oak veneer sheet, helping shops reorder the same veneer for matching future work.
As a 48 inch by 96 inch wood veneer sheet in the surfacing category, it is suited to cabinet panels, doors, and other casework faces that call for a White Oak finish.
The FormWood White Oak 48 inch by 96 inch wood veneer sheet WHOQA28RB4C offers a quartered and assorted flake White Oak appearance in a 4X8 format that matches common cabinet and panel sizes. With its 20 mil construction described in the SAP data, this sheet gives a defined veneer build for planning pressing and trimming steps in the shop. For projects that call for a straight-grain oriented White Oak look across doors, panels, and casework, this wood veneer sheet provides a consistent species, cut, and size that can be specified and reordered by the same part number.
Sold In: 1 Each