FormWood white oak veneer sheet defines this product as a wood veneer surfacing material from the FormWood brand, giving cabinet and woodworking projects a consistent species match across visible surfaces. The product is categorized by Wurth Baer Supply as a wood veneer sheet, so it is intended to face panels rather than function as structural lumber. The stated 24"x96" size identifies it as a 2 ft by 8 ft sheet, which helps align it with panel layouts that follow common cabinet and fixture dimensions. The SAP description notes 2X8 10 MIL WHITE OAK QTRS ASSTD FLAKE, tying the 2x8 size, approximate 10 mil backing thickness, white oak species, and quartered assorted flake cut into a single defined sheet.
The 24"x96" size on this FormWood white oak veneer sheet establishes the working footprint for cutting, so installers can lay out parts such as cabinet ends or tall gables along the 8 ft length. The 2X8 notation in the SAP description confirms this footprint, which supports straightforward optimization of cuts from a known rectangle. The 10 MIL reference to backing thickness means the sheet has a defined construction that influences how it behaves during trimming and pressing onto substrates. Because it is classified as a wood veneer sheet, it is meant to bond to underlying panels during installation rather than act as a stand-alone board.
The product name FormWood White Oak 24"x96" Wood Veneer Sheet, WHOQA28RB2A, identifies it as a full-size sheet suited to covering cabinet, furniture, or fixture panels that match or nest within a 2 ft by 8 ft layout. Being part of the Edgebanding & Surfacing | Veneer Sheets category at Wurth Baer Supply places it directly in the surfacing workflow, sitting on top of sheet goods such as core panels in a typical shop sequence. The white oak species designation lets shops use it wherever a white oak appearance is desired across faces, such as door panels, drawer fronts, or exposed cabinet ends that benefit from a consistent species presentation.
The 2X8 10 MIL WHITE OAK QTRS ASSTD FLAKE SAP description gives repeatable identifiers for specification and reordering, so shops can reference the same size, backing, species, and cut for future runs under the WHOQA28RB2A part. The 10 MIL statement on backing thickness means fabricators work with a veneer sheet of known construction, which affects how the material responds when pressed to substrates and trimmed at edges. The "QTRS ASSTD FLAKE" characterization of the white oak veneer cut outlines that the grain is quartered with assorted flake figure, helping maintain similar grain expectations across multiple sheets when planning visible assemblies. The manufacturer part number WHOQA28RB2A ties these attributes together into a single product code, simplifying job documentation and purchasing for repeated or phased projects.
The FormWood White Oak 24"x96" Wood Veneer Sheet is identified as a 2X8 sheet, meaning it measures approximately 24 inches by 96 inches, fitting many cabinet and panel layouts.
The 10 MIL wording in the SAP description indicates an approximate 10 mil backing thickness, which defines how the veneer sheet is constructed for handling and bonding to substrates.
The sheet is described as WHITE OAK QTRS ASSTD FLAKE, meaning it uses white oak veneer in a quartered assorted flake cut for its visible wood grain character.
Wurth Baer Supply classifies it as a Wood Veneer Sheet within Edgebanding & Surfacing, so it is intended as a surfacing layer applied over core panels in fabrication.
The manufacturer part number is WHOQA28RB2A, which uniquely identifies this FormWood white oak 24"x96" veneer sheet and supports accurate reordering.
The sheet is supplied by Wurth Baer Supply, a specialty wholesale distributor to the woodworking industry, providing veneer sheets among other shop materials.
The FormWood White Oak 24"x96" Wood Veneer Sheet, WHOQA28RB2A, offers a defined 2 ft by 8 ft white oak surface with an approximate 10 mil backing for bonding to panel cores. The WHITE OAK QTRS ASSTD FLAKE description establishes its quartered assorted flake grain character for visible faces. As a wood veneer sheet in Wurth Baer Supply's Edgebanding & Surfacing category, it is positioned for shops that need consistent white oak surfacing across cabinets, furniture, and fixtures. Use the WHOQA28RB2A identifier when specifying this exact combination of size, species, backing, and cut for upcoming work.
Sold In: 1 Each