Amerock self-close variable overlay hinge describes a semi-concealed face-frame hinge designed for cabinet doors where part of the hinge shows and part stays hidden, so the door presents a cleaner look while still giving visible reference points during layout. The product is a face-mount hinge for face-frame construction, which positions directly on the frame and door stile to support straightforward alignment in common cabinet builds. The hinge is identified as Amerock Corporation manufacturer part number BPR3429AE, so installers can match it consistently across multiple jobs and service calls. Being a variable overlay style means one hinge pattern can accommodate different door overlays on a face frame, which helps standardize hardware choices across mixed cabinet runs. The hinge belongs to the semi-concealed hinges product class, providing a balance between streamlined appearance and accessible hinge geometry for hinge placement, hinge spacing, and repeatable shop setups.
This Amerock semi-concealed face mount hinge is built specifically for face-frame cabinets, so the hinge leaves mount to the frame and door rather than to a separate panel, which supports common North American cabinet construction. The screw-on design means the hinge attaches using hinge screws that pass through the hinge plates, so layout is set by screw placement rather than press-in hardware, which suits on-site adjustments. The hinge is identified in the web description with screw size #5 x 5/8, which indicates the screw shank and length used with the hinge plates, so drilling depth and pilot selection can follow that reference. As a self-close hinge, the closing action is built into the hinge geometry, so installation centers on positioning and fastening the hinge rather than adding secondary closing devices.
This Amerock self-close variable overlay hinge fits into cabinet projects built around face frames, so it works where the cabinet opening is framed and the door overlays that frame instead of sitting flush within it. The variable overlay characteristic lets the same hinge configuration adapt to different overlay amounts on that frame, so door reveals can vary while the hinge type stays consistent across upper, base, or utility cabinets. Being semi-concealed means only part of the hinge is visible when the door is closed, so the door face remains the visual focus while still showing a controlled amount of traditional hardware in Antique English. The Antique English finish ties the visible sections into darker-toned or classic cabinet hardware programs, so pulls, knobs, and visible hinges can be coordinated by finish naming. The hinge belongs to the Amerock Corporation line, so it matches an established cabinet hardware brand that specifies this BPR3429AE part for repeat ordering and project documentation.
The self-close action in this Amerock semi-concealed face-frame hinge brings the cabinet door closed as it reaches the end of the swing, so doors tend to seat against the frame without relying solely on user force. This behavior helps maintain a consistent closed position from door to door within a run, which matters when aligning reveals and sightlines across multiple cabinets. The screw-on mounting style lets installers set hinge positions using familiar tools and fasteners, so hinge locations can be measured, marked, drilled, and driven in a predictable sequence in both shop and field settings. As a face mount hinge within the semi-concealed hinges product class, it uses the frame face as its primary reference, so hinge alignment keys off the cabinet frame edges instead of hidden hardware pockets, which simplifies layout for repeat work. The specified screw size of #5 x 5/8 in the web description defines the fastening point length for the hinge plates, which informs bit selection and drilling depth when preparing doors and frames for mounting. Because the hinge is categorized explicitly as a face mount hinge, it suits projects standardized on face-frame cabinet construction, which helps keep hinge selection consistent when ordering through Wurth Baer Supply.
The Amerock self-close variable overlay hinge is a face mount hinge for face-frame cabinets, so it is used where a face frame surrounds the cabinet opening and the door overlays that frame.
The Amerock hinge is classified as a semi-concealed hinge, meaning part of the hinge is hidden when the door is closed while a portion remains visible, which balances appearance with visible reference points.
The variable overlay feature allows this Amerock hinge to work with different door overlay amounts on the same face frame, so one hinge style can serve cabinets with varying overlays.
The Amerock BPR3429AE hinge is a screw-on face-mount hinge, so it fastens to the cabinet face frame and door using hinge screws through its mounting plates.
The web description lists screw size #5 x 5/8 for this Amerock hinge, which indicates the diameter and length of the screws used with its mounting plates.
The Amerock self-close variable overlay semi-concealed face-frame hinge is identified in Antique English finish, providing a traditional darker metal tone where the hinge remains visible on the cabinet.
The Amerock self-close variable overlay hinge, part number BPR3429AE, provides a semi-concealed face mount option tailored to face-frame cabinet construction, so it fits projects built around framed openings. Its variable overlay capability means one hinge style can serve different overlay amounts, which supports streamlined hardware choices across mixed door conditions. The Antique English finish gives the visible hinge sections a coordinated look alongside other Amerock hardware identified with the same finish name. Ordering this hinge from Wurth Baer Supply connects the project to a distributor focused on cabinet hardware for the woodworking industry, aligning this Amerock hinge with a broader range of trade-oriented products.