Festool Granat 220 grit abrasive sheet gives you a hardened aluminum oxide abrasive with ceramic grit, so each stroke cuts efficiently while maintaining a fine, controlled scratch pattern that suits finishing and intermediate sanding work. The stearate coating on the abrasive sheet provides anti-clogging properties, which helps the sheet shed dust and swarf instead of loading so you keep a more consistent cut over a longer sanding cycle. The 133mm x 80mm sheet size matches Festool LS 130 linear sanders and Festool RTS 400 sanders, so it fits those tools for flat and edge work where that pad size is specified. The 220 grit size sits in the fine range, which supports surface preparation before finishing or between coats where a smooth, uniform surface is required.
The Granat 80x133 P220, 14 hole layout is designed around Festool LS 130 linear sanders and Festool RTS 400 sanders, so when the sheet is mounted the holes align with those tools ventilation systems for effective dust extraction. The 133mm x 80mm dimensions match the pad footprints on those sanders, which helps the abrasive sit flat across the backing pad so sanding pressure remains even. The 220 grit rating works with these sanders for finishing and prep passes, which supports workflows that move from coarser Granat grits into this finer step without changing to a different abrasive family.
The Festool all new Granat abrasive was originally designed for use on solvent-based, high-VOC surfaces and hard surface paints, so it addresses coatings that can quickly load ordinary abrasives. Those anti-clogging properties also serve on clear coats, where the stearate coating helps limit buildup and preserve a predictable scratch pattern for subsequent finishing steps. The same Granat structure is well suited for plastics, mineral-based surfaces, solid surface materials, and acrylics, supporting installers who deal with mixed synthetic materials in a single job. The abrasive is specified for wood and composites as well, which lets one abrasive line cover cabinet components, built-ins, and composite trim pieces while maintaining similar cut behavior across these substrates. The availability of grits from 40 to 500 for Festool sanders means this 220 grit option can sit in the middle of a complete sanding system using the same abrasive family.
The hardened aluminum oxide abrasive with ceramic grit composition gives the Granat sheet extreme high performance, which means the 220 grit can remove minor defects while still leaving a fine profile that suits finishing passes. The innovative design of the grit type produces better appearance, so the scratch pattern from the 220 grit step helps coatings lay down more evenly on properly prepared surfaces. Festool describes this as saving time and money over the long run, because the long life and predictable cutting behavior reduce abrasive changes and rework. The 14 hole pattern on the Granat 80x133 P220 layout cooperates with the dust extraction systems on Festool LS 130 linear sanders and Festool RTS 400 sanders, which contributes to cleaner work surfaces and sustained cutting efficiency. By using a 220 grit that is part of the broader Granat range, sanding sequences can progress or step back within the same abrasive line to match repair or finishing needs while maintaining surface quality.
The abrasive sheet measures 133mm x 80mm, which aligns with Festool LS 130 linear sander and Festool RTS 400 sander pads for flat and edge sanding tasks.
This Granat 220 grit sheet is compatible with Festool LS 130 linear sanders and Festool RTS 400 sanders, matching their pad size and hole pattern for proper dust extraction.
The Granat 220 grit abrasive can be used on clear coats, plastics, mineral-based surfaces, solid surface materials, acrylics, wood, composites, and solvent-based high-VOC surfaces.
The Granat 80x133 P220 has a 14 hole configuration that matches Festool LS 130 and RTS 400 sanders, allowing dust extraction systems to draw dust through the sheet effectively.
The 220 grit rating places this Granat sheet in the fine sanding range, supporting surface preparation, between-coat sanding, and finishing where a smooth surface is required.
The Granat stearate coating provides anti-clogging properties, which helps when sanding solvent-based, high-VOC coatings and clear finishes by reducing loading and maintaining a consistent cut.
The Festool 497123 Granat 80x133 P220, 14 hole abrasive sheet combines hardened aluminum oxide, ceramic grit, and a stearate coating to support demanding sanding tasks across coatings, synthetics, wood, and composites. Its 133mm x 80mm dimensions and 14 hole layout are aligned with Festool LS 130 linear sanders and Festool RTS 400 sanders, so it fits into established dust-extracted workflows. Selecting this 220 grit sheet allows sanding sequences to reach a fine stage within the wider Granat range from 40 to 500 for Festool sanders while maintaining consistent abrasive behavior.
Sold In: 1 Box