NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPNPD-30-HI to RSRSD-30-HI.
Omega National Hickory Plate Rack gives a cabinetmaker or remodeler a ready-made way to organize and display plates in a cabinet run. The rack is built as a plate display rack, so it is intended to hold plates upright where they can be seen and reached easily in everyday kitchen use. Its 30 inch length lets it span a typical cabinet opening or work as a focused display section in a larger run, supporting consistent layout from one cabinet to the next. The 5/8 inch width keeps the rack visually light while dedicating minimal cabinet depth, which helps preserve storage space behind or below the display area for additional items. At 13-1/16 inches high, the rack provides vertical room to present plates while still fitting typical upper cabinet interior height planning for kitchen and bath work.
The Omega National Hickory Plate Rack is identified at 5/8 inch width, 13-1/16 inch height, and 30 inch length, so a cabinetmaker can plan openings and shelf positions around known dimensions. Using a 30 inch long rack lets the installer design a dedicated plate section that aligns with a single cabinet or a symmetrical pair of narrower cabinets. The 13-1/16 inch height works as a defined visual field inside the cabinet, allowing plates to read as a group above a base shelf. Because the rack is part of the plate display rack product class, it is suited to interior cabinet mounting where plates need organized separation and repeatable alignment across multiple projects.
This Omega National Hickory Plate Rack is a plate display rack in the Kitchen & Bath Cabinet Accessories category, so it is meant to live inside kitchen and bath cabinets rather than as loose countertop storage. The 30 inch length fits well in wall cabinet runs where a single wider cabinet is planned for visible dish storage. By using the verified 5/8 inch width and 13-1/16 inch height, a shop can size cabinet interiors so the rack sits between fixed shelves or within a framed opening while keeping reveals consistent with nearby doors or fronts. The hickory material ties directly to hickory cabinet lines, which helps designers specify this rack when they want the interior display to match the face frames or doors visually along an entire wall.
The defined 30 inch length of the NPD-30-HI plate rack lets a fabricator repeat the same display module across several cabinets, which reduces layout guesswork from job to job. Because the height is specified at 13-1/16 inches, drafters can set shelf elevations and stiles so the rack clears the interior while giving plates a consistent reveal above the shelf surface. The 5/8 inch width matters when building cabinet depth, since it occupies a known amount of space and allows predictable spacing between the rack and the cabinet back or doors. The manufacturer part number NPD-30-HI ties these dimensions and material to a single ordered item, which supports shop drawings, cutlists, and ordering documentation for repeatable fabrication and installation workflows.
The Omega National Hickory Plate Rack NPD-30-HI is identified as 5/8 inch width, 13-1/16 inch height, and 30 inch length, which supports precise cabinet opening and shelf layout during design.
The product is a plate display rack in the Kitchen & Bath Cabinet Accessories category, so it functions as a dedicated rack for organizing and displaying plates inside cabinets.
The Omega National Hickory Plate Rack is used to hold plates upright within a 30 inch cabinet section, creating a visible plate display area while keeping dishes organized for everyday access.
The 5/8 inch width defines how much depth the rack occupies, which helps cabinetmakers maintain interior storage space and design predictable clearances around the plate display area.
Omega National Products branding identifies the rack as part of their plate display line, which helps shops match this NPD-30-HI model across multiple cabinetry projects.
The 13-1/16 inch height sets a defined vertical display zone, allowing plates to stand visibly above a shelf while still fitting typical interior cabinet dimensions in kitchen and bath layouts.
The Omega National Hickory Plate Rack 5/8 inch by 13-1/16 inch by 30 inch offers a defined module for creating plate display sections inside hickory kitchen or bath cabinets. Its role as a plate display rack in the Kitchen & Bath Cabinet Accessories category means it is purpose-built for upright plate organization within cabinet interiors. With dimensions tied directly to the NPD-30-HI part number, this rack fits into drawings and ordering lists as a repeatable component. For a project that calls for a 30 inch hickory plate display area matched to hickory cabinetry, this rack provides a clear, dimensioned choice.
Sold In: 1 Each