Omega National Maple Plate Rack 1-1/2"W x 12-3/16"H x 36"L - P1100MUF2

Omega National Maple Plate Rack For Cabinet Displays

Omega National maple plate rack is a solid wood plate display rack designed for cabinet or wall openings where a 36 inch long run is needed. The rack uses 3/8 inch diameter dowels that are set 2 inches on center, so plates stand in consistent, repeatable slots that keep spacing uniform across the full length. The ready-to-assemble format uses 36 inch long top and bottom pre-drilled rails with 12 inch long dowels, so the assembled rack height is controlled at 13-1/16 inches for predictable fit in designed openings. The solid unfinished maple construction lets you match finishing steps to the rest of the project, so the installed rack blends into custom cabinet interiors or trim work. Each RTA kit is configured to make a front and back pair of racks, so a cabinet opening can be built with parallel rows to support plates from both edges.

Key Plate Rack Details That Affect Your Project

• The RTA kit provides 36 inch long top and bottom pre-drilled rails, so dowel locations are fixed and alignment stays straight along the full span, which helps plates sit evenly when the rack is mounted into a cabinet run.
• The kit uses (28) 12 inch long dowels in round or fluted styles, so you can select a dowel profile that matches the visual style of the surrounding cabinetry while still maintaining identical support spacing.
• Dowels are 3/8 inch diameter and spaced 2 inches on center, so each plate position is repeatable along the rack length, which simplifies layout when you plan how many plates will be displayed in a given opening.
• The assembled rack height is 13-1/16 inches, so you can design or evaluate cabinet openings against a known vertical dimension and keep consistent clearances above and below the displayed plates.
• The rack is available in solid unfinished wood species, including maple noted here, so finishing steps can be scheduled with the rest of the millwork, helping visual consistency across doors, frames, and interior components.

Ready-To-Assemble Plate Rack Layout And Fit

This 36 inch maple plate display rack uses a ready-to-assemble layout with top and bottom rails and 12 inch dowels, so the installer controls assembly while still working from pre-drilled hole locations. Because the assembled unit height is 13-1/16 inches and the length is 36 inches, the rack suits cabinet or niche designs built around those dimensions without on-site guesswork. The 3/8 inch diameter dowels on 2 inch centers create a regular grid of support points, which keeps plates upright once the rack is fixed into place. Solid unfinished maple lets the rack be finished after fitting, so color and sheen can be matched to adjacent panels, face frames, or trim pieces.

Using The Maple Plate Display Rack In Cabinet Work

Where This 36 Inch Plate Rack Fits Best

This Omega National maple plate rack is categorized as a plate display rack for kitchen and bath cabinet applications, so it fits naturally into cabinetry where visible plate storage is part of the design. The 36 inch length aligns with common cabinet module widths, allowing the rack to run across a single wide opening or be centered in a larger custom space. The assembled pair of front and back racks creates two parallel rows, so plates rest between dowels on both edges, which supports the load along the plate rims rather than a single contact line. With a fixed assembled height of 13-1/16 inches, the rack can be planned into upper or base cabinet sections that need a defined visual band of plate storage. The solid unfinished maple construction ties into projects that already specify hardwood interiors, supporting a consistent look from the face frame to interior components.

Why These Plate Rack Details Support Repeatable Results

The ready-to-assemble design with pre-drilled 36 inch rails means each dowel seats into preset holes, so spacing remains exactly 2 inches on center without layout work, which helps multiple racks match when a project uses several openings. Using (28) 12 inch long dowels per kit creates a dense grid of supports, so the same rack configuration repeats from one cabinet section to the next for predictable capacity. The 3/8 inch diameter dowels provide a defined contact surface for plate edges, so the loading point is consistent across every slot. Because the assembled unit height is 13-1/16 inches, fabricators can standardize cut lists for openings that use this rack, reducing layout variation between jobs. The solid unfinished maple material accepts finishing along with doors and frames, which keeps workflow linear in the shop: assembly, fit, and finish can follow the same schedule as the rest of the cabinetry.

Common Questions About This Maple Plate Rack

Choose This Plate Rack For 36 Inch Maple Runs

The Omega National maple plate rack P1100MUF2 pairs a 36 inch length with 13-1/16 inch assembled height, so it slots into cabinet designs built around those dimensions. The ready-to-assemble kit with pre-drilled rails and 3/8 inch dowels on 2 inch centers reduces layout work while delivering uniform plate spacing. Solid unfinished maple lets this plate display rack integrate into custom kitchen or bath cabinetry where matching wood species and finish control are part of the specification. Select this rack when a defined 36 inch maple plate display is required in a cabinet or wall opening.