Omega National Hickory Plate Rack 3/4"W x 13-1/16"H x 36"L - NPD-36-HI

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPDR36-H to RSDR36-H.

Omega National Hickory Plate Rack For Cabinet Display

Omega National Hickory Plate Rack gives a cabinetmaker or remodeler a defined way to store and display plates using solid hickory components. The rack is a plate display rack that runs 36 inches long, so it spans a typical upper cabinet opening and creates a continuous storage run for standard dishes. Each rack is 13-1/16 inches tall, which sets a predictable vertical space so plates sit in a consistent visual line across the cabinet. The system uses 3/8 inch diameter dowels set 2 inches on center, forming evenly spaced channels that keep plates separated, which matters for reducing contact between dishes and for predictable layout when designing a run of cabinets. The product is available in solid unfinished hickory, so it can be finished to match surrounding cabinetry and trim in the same job.

Key Hickory Plate Rack Details For Cabinet Projects

• Each rack is 13-1/16 inches tall and 36 inches long, so it fits many wall cabinet spans and gives a consistent height reference when designing or modifying cabinet interiors.
• Dowels are 3/8 inch diameter and 2 inches on center, creating uniform plate slots that help plates stand upright in line without improvising spacing during installation.
• National Omega plate racks are available as pre-assembled units and as ready-to-assemble kits, so a shop can choose either faster installation or more flexible assembly workflow on site.
• Assembled units come in front and back pairs, which means the same layout repeats on both faces and keeps plate rows aligned across the cabinet depth.
• RTA kits to make a front and back pair use 36 inch long top and bottom pre-drilled rails and twenty-eight 12 inch long dowels, so the assembler follows fixed hole locations rather than laying out drilling by hand.
• Dowels in the RTA kits are available in round or fluted styles, giving a choice of visual detail while keeping the same spacing and functional layout for plate storage.

Plate Rack Mounting Dimensions And Assembly Use

Each Omega National Hickory Plate Rack section measures 36 inches in length, so it can be planned to sit between vertical cabinet partitions without cutting for many common cabinet widths. The 13-1/16 inch height fixes the vertical dimension, which helps when setting the rack between existing shelves or designing a dedicated plate cabinet bay. With dowels at 2 inches on center, plate slots repeat at a known interval, which simplifies aligning the rack with centered dishes or balancing layout with neighboring cabinet components. The ready-to-assemble version uses 36 inch long pre-drilled rails with holes for the 3/8 inch dowels, so assembly follows those holes and keeps spacing straight for a uniform finished look.

Using The NPD-36-HI Rack In Real Cabinet Work

Where This Hickory Plate Display Rack Fits Best

The Omega National Hickory Plate Rack with part number NPD-36-HI is a plate display rack intended for kitchen and bath cabinet projects that need open plate storage. Its 36 inch length makes it suited to cabinets or alcoves that match that run, so it works well in a dedicated plate cabinet or over a base cabinet where a full-width plate display is desired. Because each rack is 13-1/16 inches tall, it creates a defined vertical band inside a wall cabinet, which helps when coordinating with adjacent shelves or glass doors. The availability in solid unfinished hickory means the rack can be integrated into custom hickory cabinetry, using the same species for a consistent appearance across doors, frames, and interior details.

How Rack Design Supports Consistent Layout Results

The Omega National Hickory Plate Rack uses 3/8 inch diameter dowels at 2 inch centers, so plate positions repeat evenly along the full 36 inch span. That spacing helps plates sit upright and separated, reducing the chance of plates touching and giving a clean, repeatable pattern across the cabinet opening. In assembled units, the front and back racks are provided as pairs, so the plate positions line up through the depth of the cabinet and hold dishes in the same channels from front to back. For shops using the ready-to-assemble kit, the 36 inch top and bottom rails are pre-drilled for twenty-eight 12 inch long dowels, guiding dowel placement so every slot aligns without field layout. Dowels are offered in round or fluted styles, providing a choice in profile while preserving the same functional spacing and rack geometry.

Common Questions About The Hickory Plate Rack

Selecting This Hickory Plate Rack For Your Build

The Omega National Hickory Plate Rack NPD-36-HI offers a 36 inch long, 13-1/16 inch high plate display rack with 3/8 inch dowels on 2 inch centers, giving cabinetmakers a defined layout for plate storage. With options for pre-assembled front and back pairs or ready-to-assemble kits using pre-drilled rails and 12 inch dowels, this hickory rack supports both shop-built and on-site cabinet projects where matching wood species and consistent plate spacing matter. Use these verified dimensions and configurations to match this rack to cabinet openings and design requirements, then integrate it into kitchen or bath layouts that call for visible plate display in solid hickory.