NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPDR36RTA-H to RSDR36RTA-H.
Omega National Hickory Plate Rack gives you a solid wood plate display rack sized for standard cabinet applications, using a 13-1/16 inch overall height to suit many upper cabinet interiors where vertical space is limited but display space is needed.
The rack uses 36 inch long rails, so it spans a typical 36 inch cabinet opening or can be cut down to fit narrower spaces where a continuous run of evenly spaced plates is desired along a wall or in a run of cabinets.
Dowels are 3/8 inch diameter and set 2 inches on center, creating consistent spacing that supports plates while keeping visibility and airflow between pieces, which matters when laying out a run that must look uniform across the entire cabinet width.
This RTA kit version is designed to make a front and back pair of racks using 36 inch long top and bottom pre-drilled rails and twenty-eight 12 inch long dowels, so you can build a matched pair that aligns across the depth of a cabinet for stable plate storage.
Available in solid unfinished hickory, the rack arrives ready for your preferred finishing schedule so it can match surrounding cabinetry or contrast intentionally, giving shops and serious DIY users flexibility to tie the rack into an existing finish system.
This Omega National plate rack is supplied as a ready-to-assemble kit with 36 inch long top and bottom pre-drilled rails, which simplifies layout because hole locations for the dowels are set at the factory and remain consistent along the full length.
Assembled height is 13-1/16 inch, so when you design a cabinet interior you can plan shelf placement and reveals around a known rack height instead of guessing clearances for plates sitting upright in the rack.
The twenty-eight 12 inch long dowels in the kit are arranged to create a front and back pair of racks, which lets you space the two rows across the cabinet depth so plates rest between them rather than balancing on a single row.
With dowels drilled 2 inches on center and using a 3/8 inch diameter, the resulting matrix of holes in the rails keeps alignment tight from front to back, which matters when you want plates to stand straight instead of leaning randomly.
The Omega National Hickory Plate Rack uses 36 inch long rails, so it suits a 36 inch cabinet bay or similar span in a kitchen run where you want a dedicated plate display zone integrated into the upper or tall cabinet layout.
Because the assembled rack height is 13-1/16 inch, it fits within many standard cabinet openings between shelves, allowing you to dedicate one shelf level to vertical plate storage while keeping space above or below for other items.
The ready-to-assemble design with top and bottom pre-drilled rails means you position the pair of rails at the front and back of a shelf or opening, then install the 12 inch dowels to create a track for plates that runs the full 36 inch width.
With dowels spaced 2 inches on center, the rack establishes a regular rhythm of vertical supports, so you can visually center key plates or distribute a set evenly across the width without reworking spacing each time a layout changes.
Solid unfinished hickory construction means the rack can sit in exposed cabinet areas where the wood species is visible, giving you the option to stain or clear-finish it alongside hickory face frames, doors, and moldings for a unified appearance.
The 3/8 inch diameter dowels create a balance between strength and visual lightness, giving enough material to support stacked ceramic plates while still reading as a fine grid that does not dominate the cabinet interior.
Because the kit supplies twenty-eight 12 inch long dowels in either round or fluted styles, you can match the dowel profile to other turned elements in the room, which keeps design language consistent from the plate rack to other decorative details.
Using factory-drilled 36 inch top and bottom rails eliminates field-measured drilling patterns for the dowels, so spacing stays precise from one end to the other and across multiple cabinets when you repeat the same rack module.
The 13-1/16 inch assembled height defines the vertical footprint of the rack, which helps when setting shelf pin holes or fixed shelf positions because you already know how much space the rack assembly occupies within the cabinet box.
As a plate display rack in the cabinet hardware workflow, this RTA kit lets shops treat plate storage as another modular insert: once assembled to the specified dimensions, it drops into a prepared opening with predictable clearances and spacing.
The Omega National Hickory Plate Rack uses 36 inch long rails and assembles to 13-1/16 inch height, giving a defined module size for planning cabinet openings and shelf spacing.
The plate rack kit uses 36 inch top and bottom pre-drilled rails with twenty-eight 12 inch dowels, so you build a matched front and back pair without laying out hole spacing yourself.
The rack uses 3/8 inch diameter dowels set 2 inches on center, which creates consistent channels that support plates while keeping open sightlines in the cabinet.
This plate display rack is classified as a plate display rack for kitchen and bath cabinets, so it is designed specifically for showing plates in cabinet interiors.
The plate rack is made from solid unfinished hickory, allowing finishing to match or coordinate with surrounding cabinet woodwork.
The 36 inch rails align naturally with a 36 inch cabinet opening, giving a full-width plate display zone that can also be trimmed for narrower custom bays.
Choose the Omega National Hickory Plate Rack when you need a defined 36 inch plate display module built from solid unfinished hickory, using 13-1/16 inch tall RTA rails and 3/8 inch dowels on 2 inch centers for predictable cabinet layouts.
Sold In: 4 Pair