Omega National Cherry Plate Rack 3/4"W x 13-1/16"H x 36"L - NPD-36-RTACH

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPDR36RTA-C to RSDR36RTA-C.

Omega National Cherry Plate Rack For Cabinet Display

Omega National cherry plate rack gives you a 3/4 inch wide, 13-1/16 inch high, 36 inch long structure for organizing plates in a cabinet opening, so you can create an ordered plate display using consistent, repeatable dimensions. This plate display rack from Omega National Products sits 13-1/16 inches tall, which fits many wall cabinet openings where a defined vertical space is needed for plate storage. The 36 inch length spans typical cabinet widths, so a single rack run can support a row of plates without breaking the visual line. Dowels in this system are 3/8 inch diameter, so each plate slot has a solid wood post defining its position. The dowels are spaced 2 inches on center, which sets an even rhythm for plate spacing and keeps dishes separated in a predictable layout.

Key Cherry Plate Rack Details For Cabinet Work

• The 36 inch long top and bottom rails give you a full 3 foot run, so the rack can extend across many standard cabinet widths without joints in the plate field.
• Rails are pre-drilled, so dowel locations are fixed at the factory, which saves layout time on site and keeps plate spacing consistent from rack to rack.
• Each rack height of 13-1/16 inches establishes a defined vertical opening, so you can plan door styles and interior clearances around a known dimension.
• Dowels are 3/8 inch diameter and 2 inches on center, so each dish position is clearly defined and plates rest between uniform posts instead of shifting in a wide cavity.
• Available in solid unfinished cherry, so the wood can be finished to match or coordinate with the surrounding cabinetry in the same work session.

Ready-To-Assemble Cherry Rack Mounting Workflow

The Omega National cherry plate rack in RTA form uses 36 inch long top and bottom pre-drilled rails, so assembly centers on inserting the 12 inch dowels into accurately positioned holes. Each RTA kit uses 28 dowels at 12 inches long, so front and back rows can be built to form a matching pair with consistent spacing. When assembled, the height remains 13-1/16 inches, so planning for the RTA rack mirrors planning for a factory-assembled rack using the same opening dimensions. National Omega plate racks are available in both pre-assembled and ready-to-assemble versions, so shops can choose either a faster installation or more on-site flexibility depending on workflow.

How This NPD-36-RTACH Rack Supports Cabinet Projects

Using The 36 Inch Plate Rack In Cabinets

The NPD-36-RTACH plate rack uses 36 inch long rails, so it fits applications where a full 3 foot section of cabinet interior is devoted to plate storage. Each assembled unit forms a front and back pair, so plates rest between two aligned rows of dowels rather than a single line, which keeps dishes oriented front to back for display. The height of 13-1/16 inches defines the vertical zone for plates, so wall and tall cabinets can be laid out with a dedicated plate section using that repeated measurement. Dowels at 3/8 inch diameter and 2 inches on center hold plates in narrow channels, so dishes stand upright and separated along the length of the rack.

Details That Support Repeatable Plate Rack Results

The Omega National cherry plate rack uses pre-drilled rails for the dowels, so each dowel seats at a precise, factory-set spacing that repeats across every build. With 28 dowels in the RTA kit, the front and back racks share the same consistent layout, which keeps plate positions aligned when the pair is installed in a cabinet. The 12 inch dowel length works within the 13-1/16 inch overall height, so the vertical portions of the rack maintain a proportional look that suits standard cabinet interiors. Solid unfinished cherry construction allows a finisher to carry the same stain or clear coat across doors, frames, and the plate rack, so the rack becomes a visually integrated part of the cabinet run.

Common Questions About The Omega Cherry Plate Rack

Selecting The NPD-36-RTACH For Plate Display Runs

The Omega National cherry plate rack NPD-36-RTACH offers a 36 inch long, 13-1/16 inch high plate display solution built around 3/8 inch dowels on 2 inch centers, so it suits projects needing a defined, repeatable plate layout. Using solid unfinished cherry, the rack can share finishes with other cherry components, so the plate section blends into the overall cabinet design. For cabinet runs where a 3 foot interior span is reserved for dish storage, this ready-to-assemble plate rack provides a matched front and back pair that organizes plates into a consistent grid-ready field.