Omega National 42 W Maple Omni Wall Mount Range Hood

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR07A42SMB1MUF1 to RSR07A42SMB1MUF1.

Omega National 42 Inch Maple Wall Range Hood Use

Omega National 42 W Maple Omni Wall Mount Range Hood gives you a wall-mounted wood hood designed for kitchens where a pronounced, block-style shape helps define the cooking area. The modern, block-style design creates a bold focal point, which helps visually anchor the cooktop run and align with contemporary cabinet lines. The maple construction supports finishing to match typical wood cabinet programs. The 42 inch width works for ranges or cooktops with a similar footprint, helping capture rising air across the cooking surface. The 42 inch height dimension in the description defines the overall vertical size before trimming, so the hood presents as a substantial feature above standard base cabinets. As part of Omega National Products wood range hoods, this unit fits into higher end cabinet layouts where an integrated wood hood is preferred over exposed metal.

Key Range Hood Details For Kitchen Projects

• The adjustable height design lets the hood be trimmed to fit the installed distance between cooktop and ceiling, which helps maintain proper visual proportions while following project-specific elevation requirements.
• The modern, block-style profile provides clean, straight lines that align with square cabinet styles, which matters when designing long wall runs where consistent geometry reduces layout distractions.
• The wall mount configuration focuses the hood over a straight run of cabinetry, which simplifies planning of upper cabinets and allows direct alignment with the range or cooktop beneath.
• The maple material accepts typical cabinet finishing systems, which supports matching stain or paint schedules so the hood reads as part of the overall cabinet package.

Wall Mount And Adjustment Details For Installers

This wall mount range hood uses a French cleat hanging system, which allows the cleat to be fastened level on the wall first and the hood body to be set onto it for final placement. That approach lets installers adjust the hood location laterally along the cleat before locking in, helping align the hood precisely over the range. The French cleat setup also helps when working alone, because the wall-fastened cleat carries the load as the hood is set in place. The adjustable height feature means the hood can be trimmed to match the chosen mounting height over the cooking surface, maintaining consistent reveal lines with adjacent cabinetry.

How This Omega National Hood Works In Kitchens

Broan Ventilation Liner For Vent Setup

This Omega National range hood incorporates a silver metallic powder-coated liner that is designed to fit Broan ventilation, so the wood shell works with Broan ventilator units for the actual air movement. Using a liner designed to fit Broan ventilation helps coordinate cutout dimensions and ventilator placement inside the hood cavity, reducing layout guesswork during rough-in. The powder-coated silver metallic finish on the liner provides a hard interior surface around the ventilator area, which supports routine cleaning in the capture zone. Because Broan ventilator is sold separately, the hood and liner serve as the decorative and structural housing while the Broan ventilator provides the airflow performance chosen for the project.

Maple Construction And French Cleat Mounting Benefits

The maple construction ties this Omni wall mount range hood directly into wood cabinet programs, allowing the exterior to follow the same finishing process as surrounding cabinetry for a consistent front elevation. That uniform material choice helps designers run crown, light rails, or side panels into the hood area without visual interruption. The French cleat hanging system simplifies wall mount installation by separating the structural fastening from the final hood placement, so wall studs can be used efficiently while still centering the hood on the range. With the adjustable height feature, installers can trim the hood body to accommodate different ceiling heights and target clearances above the cooktop, which helps maintain both headroom and effective capture coverage. Together, the maple body, French cleat mounting, and liner designed to fit Broan ventilation support a coordinated wood hood and mechanical ventilation setup in one planned assembly.

Common Questions About This Omega National Hood

Select This Hood For Broan Wood Vent Installations

This Omega National 42 W Maple Omni wall mount range hood brings together a modern, block-style maple shell, adjustable height body, French cleat mounting, and a liner designed to fit Broan ventilation. That combination supports designers and installers who need a wood range hood sized at 42x42 that coordinates visually with cabinetry while planning for a Broan ventilator as the mechanical core. For projects calling for a defined focal point over the cooktop with wall mount installation, this model provides a clear, integrated solution around the R07A42SMB1MUF1 specification.