A Maple Wood Chimney Built for 48-Inch Modern Tapered Wall Hoods

This Omega National chimney is a decorative maple wood extension designed to connect a 48-inch modern tapered wall hood to the ceiling, completing the hood's vertical profile above the cooking surface.

Key Features

• Solid maple construction provides a consistent grain surface ready to accept stain or paint after installation.
• Built for 48-inch modern tapered wall hoods in the Omega National Modern series, matching the hood's tapered profile.
• Ready-to-finish so the chimney can be stained or painted to match the surrounding cabinetry and hood body.
• Wall-mount position designed to extend vertically from the hood body up toward the ceiling line.
• 37-1/2 inch wide, 24-3/4 inch tall, and 13-3/4 inch deep to suit the geometry of the paired hood.

Closing the Gap Between the Hood and the Ceiling

A wall hood on its own typically stops short of the ceiling, leaving an unfinished gap that breaks the vertical line of the installation. This chimney fills that space. It sits above the hood body, runs up toward the ceiling, and gives the entire hood assembly the tall, built-in appearance that reads as intentional cabinetry rather than an afterthought. The tapered form follows the hood's own geometry, so the transition from hood to chimney is consistent rather than stepped.

Maple Wood, Ready for Your Finish

The chimney is built from maple, a close-grained hardwood that takes stain evenly and accepts paint without heavy preparation. Because it ships ready-to-finish, the finishing work happens on-site after installation, which means the color and sheen can be matched precisely to the hood body and the surrounding cabinet doors. A shop or installer finishing the hood in a custom color can treat the chimney as part of the same finishing run.

Where This Chimney Fits

This component is intended for designers and cabinet installers specifying a complete Omega National modern tapered wall hood assembly in a 48-inch width. Kitchens with taller ceiling heights, or those aiming for a floor-to-ceiling cabinetry effect, rely on a chimney like this to avoid a raw or incomplete top edge on the hood. It is the decorative extension only: the ventilation unit that moves air is a separate component selected based on the cooktop and ductwork, and the hood body itself is a separate SKU. Confirm the pairing against the Omega National Modern series before ordering.

Common Questions

The Finished Look a Tall Kitchen Deserves

When the goal is a hood that reads as part of the cabinetry from countertop to ceiling, this maple chimney is the piece that closes the assembly and completes the line.