NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPSW-15-CH509 to RSSW-15-CH509.
Omega National SW Series Cherry Tambour Doors provides a solid wood door solution for appliance garages and tambour-style cabinet openings, giving cabinet makers a defined product identity and part number to match recurring shop work. The door is described as solid wood, so the panel construction supports a wood-forward cabinet design when the project calls for a natural cherry face. The SW-15-CH509 designation ties this door to Omega National Products, which helps shops align it with other components from the same manufacturer line. The 47 inch width establishes a working span across a cabinet run or appliance bay, useful when planning clear opening sizes in a layout. The 5/16 inch depth described in the web information defines the approximate panel thickness, which matters when routing tracks or designing side panels to guide the door. The solid cherry identification supports projects where wood species consistency drives aesthetic decisions across a kitchen or bath installation.
The stated 47 inch width sets a baseline for the opening that this solid wood cherry tambour door is intended to span, which directly affects cabinet case dimensions and how stiles or partitions are laid out around an appliance garage. The 5/16 inch depth, described in the web information, defines the door panel thickness that interacts with side channels, so casework machining can be dimensioned to maintain smooth movement without binding. The classification as an appliance garage and tambour door signals its role in cabinet projects using a roll-style closure, guiding where it is applied in a kitchen or bath layout. The cherry solid wood construction description supports use in cabinets where visible fronts need to match cherry components elsewhere in the room, simplifying species coordination.
The listing under the appliance garages and tambour doors product class positions this Omega National SW Series Cherry Tambour Doors unit for use in cabinet openings that need a roll-style closure rather than a hinged door. The 47 inch width reference focuses it on wider cabinet spans, such as appliance garages or extended upper cabinet bays, where a single door surface can cover the full opening. The cherry solid wood description aligns it with kitchen or bath projects that specify cherry components, allowing the tambour area to visually coordinate with frames, panels, and trim made from the same species. The SW-15-CH509 part number further ties this door to Omega National Products, which helps shops standardize on a known cherry tambour door across multiple cabinet lines or client projects.
The 5/16 inch depth noted for the Omega National SW Series Cherry Tambour Doors unit provides a clear dimension for the door panel thickness, so casework drawings can assign channel widths and clearances that consistently accommodate this profile. That panel thickness combines with the 47 inch width to define the overall door envelope, which matters when drafting side panels, face frames, or internal partitions that interact with the door path. The solid wood construction description indicates a wood-based working surface that behaves like cherry during machining and finishing, aligning the door with established shop methods for sanding and coating wood components. The SW-15-CH509 manufacturer part number gives production teams and purchasing a precise reference, supporting repeat orders and consistent application whenever this specific cherry tambour door is specified for appliance garages or other tambour-style cabinet openings.
The Omega National SW Series Cherry Tambour Doors product is described as solid wood and cherry, so the working surface is a cherry solid wood construction suited to wood-focused cabinet projects.
The Omega National SW Series Cherry Tambour Doors SW-15-CH509 unit is referenced at 47 inches wide, which guides cabinet opening dimensions when designing appliance garages or other tambour-style bays.
The 5/16 inch depth in the web description indicates the panel thickness, which affects track or channel sizing so the solid wood cherry tambour door moves freely within the cabinet sides.
The product class of appliance garages and tambour doors points this solid wood cherry tambour door toward cabinet openings using a roll-style closure in kitchen or bath layouts.
The SW-15-CH509 part number identifies this specific Omega National SW Series Cherry Tambour Doors model, supporting consistent reordering for repeat cabinet jobs.
The cherry solid wood description lets the tambour door visually align with other cherry cabinet components, supporting cohesive species selection across a project.
The Omega National SW Series Cherry Tambour Doors SW-15-CH509 option pairs a defined 47 inch width with a 5/16 inch depth and solid cherry construction, aligning with projects that call for wood-based tambour doors in appliance garages or similar cabinet openings. The classification under appliance garages and tambour doors confirms its role as a roll-style closure component, while the specific part number keeps ordering and specification consistent from one job to the next. For cabinet layouts that rely on cherry fronts and a tambour-style opening, this solid wood cherry tambour door offers a clearly defined size and product identity to build into drawings and material lists.
Sold In: 1 Each