Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Omega National SW Series solid hickory tambour door covers a 36-inch wide by 47-inch tall appliance garage opening with a half round slat edge profile, supplied unfinished so it can be stained or painted to match the surrounding cabinetry.
An appliance garage keeps a stand mixer, toaster, or coffee station behind a door that disappears when open and closes flush with the cabinet run when not in use. A 36-inch opening is on the wider end of the appliance garage range, which makes this panel the right call for a garage built to house two appliances side by side or a single wide appliance with clearance to spare. The tambour format rolls along a track rather than swinging on hinges, so it does not project into the workspace when open. Track and mounting hardware are sold separately and should be sourced to match the specific garage installation.
Hickory is among the most visually active domestic hardwoods, with strong contrast between heartwood and sapwood and a tight, wavy grain that reads differently from cherry, maple, or alder in the same panel. The character is most visible once a clear or lightly tinted stain is applied, which is why the unfinished state of this door matters: finishing on-site lets a fabricator dial in the color and sheen level to blend or contrast with the rest of the kitchen. The half round profile on each slat means the face of the panel has a soft, ridged texture rather than a flat surface, which interacts with light and finish differently than the flat-edge version of the same panel. At 5/16 inch thick, the slats carry enough mass to feel substantial without adding unnecessary weight to the roll.
Cabinet shops building custom or semi-custom kitchens with an appliance garage reach for an unfinished tambour door when the finish schedule is managed in the shop or on-site rather than pre-applied at the factory. The wide 36-inch format also attracts designers specifying a garage for a larger countertop footprint, where a narrow panel would leave the appliances cramped. Homeowners doing a targeted renovation who want to match an existing hickory cabinet run will find the unfinished state gives them the control to hit the same stain formula. This door is for interior, dry applications only.
No. This SKU is the door panel only. Track, guides, and mounting hardware are sold separately and need to be matched to the specific appliance garage installation.
The half round profile gives each slat a gently curved face, producing a softly ridged surface across the panel. The flat edge profile has a flush, planar face on each slat. Both are available in this SW Series hickory line; the profile choice is a design and aesthetic decision rather than a functional one.
Solid wood. Each slat is milled from hickory, not a veneer face over a substrate, so the grain and species character are consistent through the face and edge of every slat.
Yes. Because it ships unfinished, it accepts paint as well as stain or clear topcoat. Hickory's pronounced grain will typically telegraph through a light paint film, so a primer and filled finish is worth considering if a smooth painted surface is the goal.
This SW Series solid hickory tambour door closes a wide appliance garage opening in an unfinished panel that the shop or homeowner can stain, paint, or clear-coat to fit the surrounding kitchen, with a half round slat profile that adds visual texture to the finished result.
Sold In: 1 Each