Federal Brace Archer Bench Bracket Stainless 9"H x 16"L, FB-09946

Federal Brace Archer Bench Bracket For Strong Seating

Federal Brace Archer bench bracket gives a bench installation a dedicated structural support that is sized for typical seating spans. With a 9 inch height and 16 inch length, this bracket creates a fixed load path from the bench surface back into the wall, so weight is carried into framing instead of stressing finish materials.

The stainless steel construction provides a rigid support arm that resists deformation under load, so the bracket maintains bench alignment under everyday use. A 0.25 inch material thickness adds cross-section strength, which helps the bracket handle heavier seating applications in both residential and commercial spaces.

When installed into studs, each Archer bench support bracket is rated to carry up to 500 pounds, so installers can design standard or long benches with a clear understanding of individual support capacity. This load rating helps with planning bracket spacing and can reduce callbacks related to flexing or sagging.

The Archer bench support bracket works in indoor or outdoor environments and in walls surfaced with tile, stone, brick, or drywall, so the same bracket model can be used across multiple projects and finish schedules.

Bench Support Details That Improve Real Install Jobs

• The 16 inch length on the Archer bench support bracket projects a stable arm under the bench, creating a broad bearing area that helps distribute weight and reduce pressure points along the seat.
• The 9 inch height establishes a solid vertical leg between bench and wall, which helps transfer loads efficiently into framing and supports typical bench height layouts in many seating designs.
• The bracket size of 16 inch by 3 inch by 9 inch gives installers a known envelope to work with, simplifying layout against wall finishes and coordination with other wall-mounted elements near the bench.
• Stainless steel material on the Archer bench bracket provides corrosion resistance in indoor and outdoor conditions, supporting long-term performance around moisture, cleaning, and temperature changes.
• The 0.25 inch thick construction offers substantial section strength, helping the bracket resist bending under higher loads and maintaining a level seating surface over the life of the installation.
• A carry capacity of 500 pounds per bench support bracket allows the use of fewer supports on many benches, which can speed installation and leave more open space under the seat.
• Six 1/4 inch diameter holes and three 5/16 inch diameter holes give multiple mounting points, allowing installers to match fastener sizes to framing and substrate for secure stud-based attachment.

Bench Bracket Mounting, Layout, And Load Transfer

The Archer bench support bracket is designed to be secured directly into studs, so loads travel from the bench surface through the bracket into structural framing. This direct path means the bench does not rely on tile, stone, brick, or drywall to carry weight, which reduces the risk of cracked finishes under seated loads.

With six 1/4 inch diameter holes and three 5/16 inch diameter holes, the bracket face and leg offer multiple fastening locations, helping align fasteners with stud centers and providing options when coordinating around grout lines or other wall features. The 16 inch by 3 inch by 9 inch size gives clear reference dimensions for planning bracket positions along standard and long benches.

The 500 pound carry capacity for each Archer bracket supports seating in residential and commercial settings, so installers can choose bracket spacing that matches the expected use while working within the rated load per support.

Where This Archer Bench Bracket Delivers Results

Stainless Bench Bracket Use Across Wall Finishes

The Archer bench support bracket functions in indoor or outdoor locations, so a single model can serve both interior seating and exterior bench installations. This flexibility helps simplify product selection when projects span multiple environments.

Because the bracket works with tile, stone, brick, or drywall surfaces, it fits into a wide range of wall assemblies. The structural support comes from attachment into studs, while the bracket geometry allows it to sit alongside these finishes without relying on them for strength.

In residential seating, the 16 inch length can support benches along kitchen nooks, entry areas, or mudrooms where a slim, under-seat support is preferred. In commercial settings, the same size and 500 pound capacity per bracket help support standard and long benches used in lobbies, waiting areas, or similar spaces.

The 3 inch dimension in the 16 inch by 3 inch by 9 inch size helps define the bracket profile against the wall, aiding coordination with trim or adjacent built-ins. The 9 inch height is suited to the vertical distance between bench underside and stud layout, which matters when aligning the bracket with framing behind various finish depths.

Details That Support Repeatable Bench Installations

The 0.25 inch thick stainless steel used in the Archer bench bracket creates a predictable stiffness, so installers know how the support will behave under load and can repeat layouts from project to project with consistent performance.

The six 1/4 inch diameter mounting holes and three 5/16 inch diameter mounting holes provide a fixed pattern on every bracket, so fastener placement becomes repeatable and easy to document for crew members working on multiple bench bays.

The 500 pound carry capacity for each bench support bracket supplies a clear design number that can be used when spacing brackets under standard or long benches. This known capacity helps reduce trial-and-error and supports consistent structural planning across similar installations.

The stainless steel finish also keeps the Archer bench bracket visually compatible with many contemporary seating designs, while resisting corrosion in moisture-prone or outdoor areas. This combination of appearance and durability helps keep finished benches looking consistent over time.

Being part of the Federal Brace line, the Archer bench bracket aligns with a product family focused on structural supports, so installers working with other Federal Brace components can expect similar performance-oriented design and clear capacity information.

Common Questions About Federal Brace Archer Bench Bracket

Choose This Archer Bracket For Bench Projects

The Archer bench support bracket from Federal Brace combines a 16 inch by 3 inch by 9 inch size, 0.25 inch thick stainless steel, and a 500 pound carry capacity for each bracket, giving installers a defined solution for supporting standard and long benches.

With mounting that ties directly into studs and performance across tile, stone, brick, or drywall, this stainless steel bench support fits both residential and commercial projects. Use the documented dimensions, mounting hole pattern, and load rating to plan bench layouts efficiently and bring consistent, structurally supported seating to upcoming installations.