Federal Brace Archer Bench Bracket Steel 9"H x 16"L, FB-09663

Federal Brace Archer Bench Support Bracket Use

Federal Brace Archer Bench Support Bracket is a steel bench bracket designed to support seating in residential and commercial installations. The bracket size of 16 x 3 x 9 inches creates a substantial support arm and mounting surface, which matters when you are carrying the weight of a standard or long bench. A material thickness of 0.25 inches gives the steel bracket a solid profile, helping the bench resist flex under expected live loads. A listed carry capacity of 500 pounds each, when securely installed into studs, allows you to plan support spacing and bench layout around real structural performance. The steel finish provides a straightforward surface, and when ordered in raw steel, the bracket can be painted so the visible portions match surrounding finishes. Federal Brace identifies this Archer Bench Support Bracket with manufacturer part FB-09663, which helps you specify the same component consistently across multiple seating locations.

Key Bench Bracket Details That Matter On Site

• The 16 inch length provides a deep support arm under the bench, giving solid bearing for standard or long benches in both residential and commercial seating layouts.
• The 9 inch height creates a vertical leg that transfers load down into the wall structure, supporting the stated 500 pound capacity when the bracket is anchored into studs.
• The 3 inch width offers a stable mounting footprint, helping distribute forces along the wall face for a firm bench connection in service.
• The 0.25 inch thick steel material forms a rigid bracket body, which supports the stated load rating and limits deflection under typical seating use.
• Six 1/4 inch diameter holes and three 5/16 inch diameter holes provide multiple fastening points so the load can be shared across several stud or wall-anchor connections.
• The steel finish, and the option to order raw steel, lets you paint the bracket to align with surrounding trim or wall colors where the bracket remains exposed.

Bench Bracket Mounting And Structural Layout

This Archer Bench Support Bracket is designed to be securely installed into studs, and that stud-anchored connection is what supports its 500 pound each carry capacity. The 9 inch vertical height works together with the hole pattern to position fasteners along the stud, helping transfer both downward bench load and outward leverage into the framing. With a 16 inch projection, the bracket can sit well under the bench depth, so the bench seat bears directly above the steel arm instead of relying on overhang. The combination of six 1/4 inch diameter holes and three 5/16 inch diameter holes allows you to select fastening layouts that respect the stud location while still using multiple fixings per bracket.

Using The Archer Bench Bracket In Real Projects

Where This Bench Support Bracket Performs Best

The Archer Bench Support Bracket is described for use with benches in residential and commercial settings, so it suits built-in seating runs in both private homes and public spaces. Its ability to support standard or long benches means it can serve in shorter mudroom benches as well as extended waiting-area seating when brackets are spaced appropriately along the wall line. The description notes use whether indoors or outdoors, so the same bracket style can be specified for interior breakfast nooks and exterior seating where walls allow bracket mounting. Suitability for tile, stone, brick, or drywall surfaces means the bracket can sit beneath finishes commonly found in kitchens, entries, and patio walls, allowing continuity of bench design across different rooms. Federal Brace manufactures this Archer Bench Support Bracket in the USA, which supports projects that call out domestically crafted structural components for seating installations.

Why The Archer Details Support Repeatable Results

The defined size of 16 by 3 by 9 inches gives you repeatable geometry, which helps when laying out multiple supports along a straight bench line or around a corner. The 0.25 inch steel thickness works with that geometry to give each bracket consistent stiffness, reducing variation in how individual bracket locations feel under load. The stated 500 pound each carry capacity, tied to secure installation into studs, provides a clear basis for determining bracket count and spacing along standard or long benches. Multiple holes in 1/4 inch and 5/16 inch diameters let you align fasteners with stud centers and grout lines in tile or masonry while still using enough connections to share the load. The steel finish, and the option to order raw steel for painting, means that once you establish a finish schedule, the same bracket design can be used in different color schemes without changing the structural component. Reference to manufacturer part FB-09663 and the Archer Bench Support Bracket name allows straightforward reordering and documentation, so future replacements or added sections use the same bracket style and capacity.

Common Questions About Archer Bench Bracket Use

Selecting This Bench Bracket For Your Seating Run

The Archer Bench Support Bracket by Federal Brace provides a defined 500 pound each capacity, a 16 x 3 x 9 inch steel form, and multiple mounting holes that translate directly into predictable bench layouts. Its suitability for residential or commercial benches, indoors or outdoors, and next to tile, stone, brick, or drywall lets you apply one bracket type across different spaces. When ordered in raw steel, it can be painted to align with your project colors while keeping the same structural component beneath the bench. For projects that call for a USA made bench support bracket with clear dimensional and load details, this Archer Bench Support Bracket gives a consistent specification to build into your seating plan.