Federal Brace Archer Bench Bracket For Heavy Seats

Federal Brace Archer bench bracket is a 16 inch long, 9 inch high bench support bracket designed to upgrade bench seat installations with both strength and clean lines. The bracket carries up to 500 pounds each when securely installed into studs, so a single bracket provides substantial support in load-bearing layouts. A material thickness of 0.25 inch gives the bracket a solid profile, which helps it resist flexing under typical seating loads. The black finish presents a neutral look that works with many bench designs, letting the bracket blend into darker structures or contrast lighter surfaces. As a bench bracket made for both standard and long benches, it serves residential seating runs as well as heavier traffic commercial benches where structural support is critical. Proudly crafted in the USA, it offers a domestically produced option for projects that prioritize local manufacturing.

Key Bench Bracket Details That Support Installs

• The 16 inch by 3 inch by 9 inch size gives a deep run under the bench and a tall mounting leg on the wall, which helps spread loads over a larger surface area.
• A 0.25 inch material thickness delivers a stout bracket body, reducing deflection when the bench is loaded and supporting a more solid-feeling seat.
• The 500 pound carry capacity per bracket allows planners to design standard or long benches by pairing multiple brackets along the stud layout.
• Six 1/4 inch diameter holes and three 5/16 inch diameter holes provide multiple fastener options into studs and substrates, supporting secure attachment patterns.
• The black finish coordinates with many bench frame colors and surface materials, helping the bracket visually integrate into indoor or outdoor seating designs.
• Use with tile, stone, brick, or drywall surfaces allows this bench bracket to serve a wide range of wall conditions in residential and commercial spaces.

Bench Bracket Mounting And Load Application Details

This Archer bench support bracket is engineered to carry up to 500 pounds each when securely installed into studs, giving installers a defined load target when planning bracket spacing and bench lengths. The 16 inch length reaches further under the bench seat, which helps spread contact along the underside of the bench material. With a 9 inch height, the vertical leg offers ample room to anchor into stud framing behind tile, stone, brick, or drywall, tying bench loads back to structure. The combination of six 1/4 inch diameter holes and three 5/16 inch diameter holes supports varied fastener strategies into wood framing or other suitable backing. A 3 inch dimension in the bracket profile supports stable contact at the wall, so the bench seat can rest on a bracket that is braced both vertically and horizontally.

How This Bench Bracket Performs In Real Projects

Using The Archer Bench Bracket In Different Spaces

The Archer bench support bracket is designed for use with indoor or outdoor benches, so it serves seating along entries, waiting areas, or patios where exposure conditions vary. With application over tile, stone, brick, or drywall, the bracket supports projects ranging from masonry feature walls to finished framed partitions. In residential settings, its 500 pound carry capacity per bracket allows support for standard benches at breakfast nooks or mudrooms by spacing multiple brackets along stud lines. For commercial installations, the same capacity helps handle heavier use on long benches in lobbies or corridors when brackets are laid out along structural framing. The 16 inch length supports deeper bench seats often used in comfort-focused spaces, while the 9 inch height ties loads back into wall framing that sits behind finished surfaces. Because the bracket is crafted in the USA by Federal Brace, it gives project teams a domestically made structural support component that aligns with many spec preferences.

Details That Support Repeatable Bench Install Results

The material thickness of 0.25 inch provides a robust section that resists bending, which helps benches feel solid over time under regular use. With six 1/4 inch diameter mounting holes and three 5/16 inch diameter holes, installers can select suitable fasteners and patterns to engage studs behind tile, stone, brick, or drywall, improving pull-out and shear performance at the wall. The defined 500 pound carry capacity per bracket when installed into studs gives clear parameters for layout, so bench designers can calculate bracket count and spacing based on expected loads. The 16 inch by 3 inch by 9 inch size also contributes to consistent installs, as repeated use of the same dimensions simplifies bench framing, overhang planning, and wall blocking locations. The black finish offers a consistent appearance from bracket to bracket, which supports clean visual lines under open benches in both residential and commercial environments.

Common Questions About The Archer Bench Bracket

Select The Archer Bracket For Bench Support Needs

The Archer bench support bracket from Federal Brace pairs a 500 pound carry capacity per bracket with a 16 inch by 3 inch by 9 inch footprint, giving benches substantial structural backing. Its 0.25 inch thick construction and black finish provide both strength and a clean appearance across indoor or outdoor benches. Compatibility with tile, stone, brick, and drywall surfaces, along with multiple 1/4 inch and 5/16 inch diameter mounting holes, supports a range of wall conditions. For standard or long benches in residential or commercial settings, the Archer bench support bracket FB-09945 offers a defined, stud-mounted solution crafted in the USA.