3 Inch Round Wood Grommet For Clean Furniture Pass-Through

3 inch round wood grommet for 2-1/2 inch hole describes a one-piece pass-through that finishes a routed opening while maintaining a clean wire exit in desktops and other wood furniture. The unfinished wood construction lets the installer match stains or clear finishes to surrounding work, which supports consistent appearance on custom desks, tables, or built-ins. The maple material aligns with common furniture species, so fabricators can keep a uniform wood look across the top surface. The round shape fits a 2-1/2 inch bore, giving installers a clear target dimension when laying out and drilling openings. A permanent wire hole cut out keeps the cable opening location fixed, so cuts stay consistent from one piece to the next. Sold by Wurth Baer Supply under manufacturer part WG3-83, it fits into woodworking workflows that rely on repeatable, cataloged components.

Practical Details That Support Desk And Furniture Work

• The unfinished wood grommet surface accepts stain or clear finish, so shops can finish it together with the top and keep color and sheen aligned on the same schedule.
• The one-piece grommet construction removes the need for a separate liner, which reduces parts handling and streamlines boring and fitting in a single step.
• The radiused top profile softens the edge at the bore, which helps the transition from the desktop to the pass-through look intentional on finished furniture.
• The permanent wire hole cut out fixes the cable opening in one position, which supports consistent routing patterns across multiple identical workstations or furniture runs.
• The 3 inch round format sized for a 2-1/2 inch hole matches a standard boring operation, so installers can plan tooling and jigs around dependable dimensions.

Installation Fit Around The 2-1/2 Inch Bore Size

The grommet is identified as a 3 inch round wood grommet for 2-1/2 inch hole, giving the installer both the visible flange size and the required bore dimension in one description. That clear pairing allows layout of wiring pass-throughs while benches are still on the saw or router table, tying the bore diameter directly to the specified product. The permanent wire hole cut out in the grommet means the cable exit remains in a fixed orientation once the part is seated in the bore, which simplifies repeating the same direction on a line of desks. Because the part is one-piece and does not require a hole liner, installers only manage the single component during fit, helping keep the operation quick in production settings.

Using This Maple Grommet In Furniture Projects

Where This Unfinished Wood Grommet Works Best

The web description states that unfinished wood grommets provide desktops and other wood furniture with a warm touch, so this part is aligned with office tops, work surfaces, and similar casework where wire pass-throughs are needed. The maple species supports projects that already use maple in their construction, keeping grain and tone in the same family for a cohesive look. Because the product sits in a 2-1/2 inch bore, it suits tops and panels with enough thickness to be bored cleanly at that diameter, which is typical for many wood furniture panels. The radiused top profile is described as a feature of these one-piece grommets, so the visible edge softens the transition at the opening, which helps the finished piece look more like built-in millwork than an exposed hole. Since the part falls under multimedia and workspace components, it fits naturally into workstations or desks that carry data and power lines through the surface.

Details That Support Repeatable Wire Management Results

The product description notes that the grommet has a permanent wire hole cut out, so every installation places cables through the same shaped opening rather than adjustable inserts. That fixed opening supports planning wire paths on shop drawings and then repeating them across multiple identical stations. The same description notes that these wood grommets are one-piece and do not require a hole liner, which reduces variation between installations because there is no separate insert to seat or orient. The radiused top, called out specifically, gives a smooth upper edge that transitions from the desktop into the bore, which helps cables visually disappear into the opening rather than highlighting the cut edge. Being an unfinished maple wood grommet allows fabricators to run the part through their normal finishing sequence, so the surface build and sheen track with the surrounding top for consistent results. The manufacturer part number WG3-83 ties these characteristics to a specific catalog reference, which aids in reordering the same configuration whenever repeat work or future matching pieces are needed.

Common Questions About This Wood Desk Grommet

Select This WG3-83 Grommet For Matched Wood Tops

The unfinished wood grommets described here, identified as 3 inch round wood grommet for 2-1/2 inch hole, give desktops and other wood furniture a warm touch while managing wire pass-throughs. The maple construction and radiused top help align the part with professional furniture-grade work. With a one-piece body that does not require a hole liner and a permanent wire hole cut out, it fits smoothly into shop workflows that value consistent bore sizing and repeatable layouts. For projects routed around a 2-1/2 inch bore where a wood look is preferred, WG3-83 from Wurth Baer Supply offers a defined, cataloged choice.