Walnut 2-1/2 Inch Bore Grommet For Desktops

Walnut 2-1/2 inch bore grommet from Doug Mockett and Company, Inc. is a one-piece solid wood wire grommet designed for desktops and other wood furniture that need a clean wire pass-through point. The unfinished wood construction lets the grommet take stain or clear finish along with the surrounding top so the wire opening visually blends into the work surface. The round design fits a 2-1/2 inch bore hole, creating a defined edge around the cutout that helps keep the opening consistent and presentable. The grommet is part of the WG3-82 series, giving installers a specific reference when matching other Doug Mockett and Company, Inc. components. This wood grommet provides a simple way to organize wires while keeping the surface appearance focused on wood rather than plastic.

Key Wood Grommet Details For Wire Management

• The unfinished wood grommet surface accepts typical wood finishing steps, so the installer can match stains or clear coats to the desktop or furniture for a uniform look across the work area.
• The one-piece solid wood design creates a single unit in the bore hole, which simplifies placement in the opening and keeps the visible edge consistent around the wire pass-through.
• The radiused top profile softens the transition at the bore hole edge, which reduces a sharp corner at the wire opening and gives the desk or furniture a more finished appearance around the cutout.
• The round wire grommet classification and 2-1/2 inch bore fit provide a known size reference, which helps in selecting the correct drill or boring operation when preparing desktops or other wood surfaces.
• The walnut identification in the product description signals a wood choice that pairs well with many wood furniture tones, giving designers flexibility when planning coordinated work surfaces.

Installation Fit Around 2-1/2 Inch Bore Openings

This round wire grommet is specified for a 2-1/2 inch bore hole, so the drilling or boring operation can be set directly to that diameter for a predictable fit. The one-piece construction means the grommet occupies the full bore as a single element, so there is no separate liner to account for during layout. The radiused top sits over the edge of the hole, covering the cut circumference and helping to hide minor variation at the opening. Because it is a solid wood component, the bore depth only needs to accommodate the grommet body rather than layered parts, which simplifies planning the edge condition on desks and other wood furniture tops.

Using The WG3-82 Grommet In Wood Projects

Where This Unfinished Wood Grommet Performs Best

The unfinished wood grommets described as providing desktops and other wood furniture with a warm touch work well wherever a wire pass-through is needed without introducing a contrasting plastic part. On office desks, the 2-1/2 inch bore size gives room for multiple cords while keeping the opening controlled within a standard round cutout. On workstations or conference tables made from wood, the walnut material reference coordinates visually with many veneers and solids once finished, so the grommet reads as part of the furniture instead of a separate trim ring. In custom cabinetry or built-in furniture, the solid wood construction supports using the same finishing schedule as the surrounding wood, which streamlines shop finishing steps.

Details That Support Clean Wire Routing Results

The permanent wire hole cut out in the grommet creates a fixed pathway for cables, so the opening remains consistent every time wires are added or moved. Because the one-piece grommet does not require a hole liner, there are fewer parts that could shift during use, which helps the edge alignment around the bore stay visually stable over time. The radiused top spreads the bearing surface over the desk or furniture edge, which can help reduce visible wear at the cut line as cords rest against the profile. The round wire grommet design defines the wire route through a simple circular opening, supporting straightforward layout when positioning multiple grommets on a desktop or along a wood furniture run.

Common Questions About The WG3-82 Wood Grommet

Selecting This Grommet For Wood Work Surfaces

The unfinished wood construction, 2-1/2 inch bore fit, and radiused top profile make this Doug Mockett and Company, Inc. WG3-82 grommet a practical choice when routing wires through wood desktops or furniture. The one-piece solid wood design keeps installation straightforward while giving finish shops the flexibility to match stains or clear coats to the surrounding surface. For projects where a round wire grommet needs to function cleanly and visually integrate with wood, this walnut 2-1/2 inch bore grommet offers a focused solution for controlled cable pass-throughs.