Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Quickscrews #8 x 2" flat head assembly screw is built for cabinet carcass work, drawer box assembly, and general wood joinery where a 2-inch screw gives you the thread engagement needed to pull two panels together firmly. A coarse thread grips wood fiber, engineered panels, and cabinet-grade plywood without stripping, while the lubricated finish keeps driving smooth even in dense stock.
At 2 inches, this screw reaches through 3/4-inch cabinet panel stock and buries a solid inch of thread into the mating piece — enough engagement for corner joints, dado assembly, and back-panel attachment where the joint needs to hold up to racking and daily load cycles. It also works well for drawer box construction in 1/2-inch Baltic birch, where the extra length provides pull strength that shorter screws can't match in edge-grain plywood. Cabinet shops assembling face-frame boxes in softwood or poplar will find the coarse thread and 2-inch shank a reliable combination for through-the-stile connections where a long reach into the rail matters.
The flat countersunk head sits flush once driven, leaving a clean surface for interior cabinet panels where a proud head would interfere with hardware installation or drawer fit. The milling nibs on the underside of the head work like small reamers: as the head seats, the nibs clear wood fibers and let the head drop flush without a separate countersink operation. That's a measurable time saving on high-volume runs. The lubricated finish reduces friction along the thread and under the head, so the screw drives to full depth with less heat and less torque demand on the driver — useful when you're running hundreds of screws through a shift.
This screw is a natural fit for cabinet production shops that run a mix of solid wood and sheet goods and want one coarse-thread workhorse for carcass assembly. It suits residential installers assembling pre-built cabinets on site, where the combo drive means either a square or Phillips bit gets the job done without a bit swap. Woodworkers building furniture in pine, poplar, or plywood will appreciate the double auger point's quick start in thicker stock — the two flutes reduce the force needed to get the screw moving and lower the chance of splitting a face-grain edge. Because the screw is not rated for exterior or corrosion-prone environments, keep it on interior wood projects.
The combo recess accepts a #2 square (Robertson) bit or a #2 Phillips bit. Either bit works in the same recess, so you can use whichever you have on hand without switching heads.
A standard Type 17 point has one flute. The double auger adds a second opposing flute, which doubles the chip-clearing action as the screw enters. In stock thicker than 3/4 inch — or when driving through two panels at once — that extra clearance reduces driving resistance and lowers the risk of the material splitting at the entry point.
In most wood and plywood applications, the milling nibs on the underside of the flat head will seat the screw flush without a pre-drilled countersink. In very hard hardwoods, a shallow countersink pilot can still help, but for cabinet ply, MDF, and soft-to-medium hardwoods the nibs typically handle it in one step.
No. The lubricated finish on this screw is designed for interior wood assembly. For outdoor work or pressure-treated lumber, choose a screw with a corrosion-resistant coating rated for those conditions.
Coarse thread is the right choice for solid softwoods, plywood, MDF, and particleboard. For dense hardwoods like maple or oak, a fine-thread screw provides better holding power and reduces splitting risk.
When the job calls for a 2-inch flat head assembly screw that starts fast, seats flush, and keeps moving through a long production run, this Quickscrews #8 in a box of 1,000 covers the task without slowing the line.
Sold In: 1000 Each
