
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Prisma steel table leg from Camar is part of Peter Meier's Prisma Series, giving you a metal support solution built specifically for work surfaces and tables. The leg has a 2-3/8 inch diameter, so it spreads load over a wide footprint and helps keep heavier tops steady during daily use. The 27-3/4 inch length matches typical table height, which simplifies planning when you are building standard-height desks, work tables, or shop benches. The polished chrome finish provides a clean, reflective look that suits commercial and residential interiors where exposed supports stay visible. This Prisma Series leg carries a 660 lb per leg load rating, so each leg can support substantial tops such as thicker laminate or wood surfaces without overstressing the support points. Using a branded Prisma Series component also helps keep similar projects visually consistent over multiple installations.
This Prisma Series leg uses a separate bracket to attach the leg to the table, creating a defined connection point between the top and the support. That bracketed connection gives you a fixed mounting reference, which is useful when aligning multiple legs on longer tops. The leg also has a built in 1-1/8 inch adjustable foot, so you can compensate for typical floor irregularities while holding the work surface at the planned height. With 27-3/4 inches of leg length plus the adjustable foot range, you can fine-tune final table height to match adjacent furnishings or existing installations.
The Prisma Series 27-3/4 inch leg in polished chrome fits projects that call for standard table height with an exposed modern metal support. The 2-3/8 inch diameter suits wider tops on work surfaces, collaboration tables, and similar installations where leg visibility and stance both matter. Because each leg is rated for 660 lb, it works well under heavy-duty tops such as thicker wood, composite, or laminate work surfaces that carry equipment, fixtures, or frequent point loads. The polished chrome finish ties into contemporary hardware, making it a practical option in offices, hospitality spaces, and workshop areas where a clean, reflective metal look is preferred.
The separate bracket used to attach the leg to the table provides a clearly defined mounting pattern, which helps repeat the same leg placement across multiple tops on a job. That fixed interface also simplifies layout when you are coordinating legs with edge clearances or under-table components. The built in 1-1/8 inch adjustable foot lets you dial in height across uneven floors, reducing rocking by spreading the 2-3/8 inch diameter leg firmly onto the surface. With 27-3/4 inches of leg length targeted at table height, you start close to the desired finished level and use the adjustment range for final tuning. The 660 lb per leg load capacity then maintains stability once everything is set, supporting heavier loads without requiring oversized structural framing at each support point.
The Prisma steel table leg is 27-3/4 inches long and has a built in 1-1/8 inch adjustable foot, so it supports standard table height with room to fine-tune final elevation.
Each polished chrome Prisma Series leg has a 660 lb per leg load bearing capacity, allowing a single support to carry substantial work surface or tabletop weight.
The Prisma Series table leg has a 2-3/8 inch diameter, creating a broad contact area at the floor and a solid stance for supporting heavier tops.
The built in 1-1/8 inch adjustable foot lets the Prisma steel table leg compensate for floor unevenness, helping align multiple legs to the same working height.
This Camar Prisma Series table leg has a polished chrome finish, providing a bright metal look that coordinates with chrome hardware and fixtures.
The 27-3/4 inch length targets table height, fitting applications like desks, work tables, and general work surfaces that need standard seating height.
The Prisma steel table leg from Camar pairs a 2-3/8 inch diameter with a 27-3/4 inch table height length, giving you a defined starting point for stable work surfaces. The polished chrome finish and 660 lb per leg rating support both appearance and load demands on commercial or shop projects. The separate bracket connection and built in 1-1/8 inch adjustable foot help you set consistent heights across multiple legs. Use this Prisma Series leg when a visible chrome support and substantial weight capacity are priorities for your next table build.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set | CM330-70-BK Mfr# 330-70-BK | Prisma steel table leg 27-3/4 in Gloss Black | ||||
Sold in: 1 Set | CM330-70-MT Mfr# 330-70-MT | Prisma table leg set matte black 27-3/4 in | ||||
Sold in: 1 Set | CM330-70-ST Mfr# 330-70-ST | 2-3/8" Diameter x 27-3/4" High Prisma Rounded Table Leg Set, Brushed Chrome | ||||
Sold in: 1 Set | CM330-87-BK Mfr# 330-87-BK | 2-3/8" Diameter x 34-1/4" High Prisma Rounded Table Leg Set, Glossy Black | ||||
Sold in: 1 Set | CM330-87-CH Mfr# 330-87-CH | 2-3/8" Diameter x 34-1/4" High Prisma Rounded Table Leg Set, Polished Chrome | ||||
Sold in: 1 Set | CM330-87-MT Mfr# 330-87-MT | Prisma steel table legs 34-1/4 in Flat Black | ||||
Sold in: 1 Set | CM330-87-ST Mfr# 330-87-ST | 2-3/8" Diameter x 34-1/4" High Prisma Rounded Table Leg Set, Brushed Chrome |