Prisma Steel Table Legs For Heavy Work Surfaces
Prisma steel table legs from Camar give a counter-height support option for work surfaces that need strength and a clean look. Each leg has a 2-3/8 inch diameter, so the round profile spreads the load over a wider footprint and provides a solid feel under countertops or benches. The legs stand 34-1/4 inches high, which matches typical counter height layouts where a taller working surface is required. Each leg is designed for a 660 lb load bearing capacity, allowing one leg to support substantial static weight in shop, office, or residential work areas. The steel construction provides a rigid support column, so tops stay stable under load. This set is part of Peter Meier's Prisma Series, which identifies it as a coordinated line within Camar's table leg offering.
Key Prisma Rounded Table Leg Set Advantages
- The 34-1/4 inch height sets work surfaces at counter height, which suits standing work areas or higher seating layouts.
- The 2-3/8 inch diameter steel tube creates a sturdy column that resists flexing, supporting stable tabletops.
- The 660 lb per leg load bearing capacity allows each leg to carry substantial weight, supporting dense materials or equipment.
- The matte flat black finish gives the legs a neutral appearance that pairs with many surface colors while hiding minor marks.
- The built in 1-1/8 inch adjustable feet allow height tuning, which helps level the work surface on uneven floors.
- The separate brackets are designed to attach each leg to the table, creating a defined interface between top and support.
Mounting Details For Camar Table Leg Set
This Camar Prisma rounded table leg set uses separate brackets to attach each leg to the underside of the table, so installers have a dedicated mounting point for layout. The steel construction works with the brackets to form a rigid connection between leg and work surface. Each leg has built in 1-1/8 inch adjustable feet, allowing the installer to fine tune height at the floor rather than cutting material. The 34-1/4 inch overall leg height, combined with the adjustable feet, supports counter height installations where a consistent finished height across multiple legs is important.
Using Prisma Rounded Legs In Real Projects
Where This 34-1/4 Inch Leg Set Fits Best
The 34-1/4 inch high Prisma rounded table leg set fits counter height applications where a taller surface is required, such as work counters or higher tables. The 2-3/8 inch diameter round profile provides a substantial support presence under larger tops, which helps spread weight over each leg location. With a 660 lb load bearing capacity per leg, this Camar set supports heavy work surfaces, dense solid tops, or equipment-laden counters. The matte flat black finish lets the legs visually recede under darker tops or contrast under lighter surfaces, supporting both functional and design-driven layouts. As part of Peter Meier's Prisma Series, the legs match other Prisma components in appearance, which matters when a project uses multiple coordinated supports in one space.
Why Prisma Steel Table Legs Support Repeatable Results
The steel construction of the Prisma legs provides consistent strength from leg to leg, which supports repeatable performance across a run of counters or tables. The 34-1/4 inch nominal height, paired with the built in 1-1/8 inch adjustable feet, allows fine adjustment so multiple legs can be leveled to the same finished height without modifying the tubes. The separate brackets define the mounting footprint on the underside of the table, helping installers position each leg in a repeatable pattern across similar projects. The 2-3/8 inch diameter dimension stays constant across all legs in the set, which simplifies layout when spacing supports along the length of a work surface. The flat black matte finish provides a consistent appearance from job to job when using this same part number, helping maintain a uniform look in repeat installations.
Common Questions About This Camar Leg Set
What is the height of the Prisma rounded table legs?
The Prisma rounded table legs are 34-1/4 inches high, which positions work surfaces at counter height and supports taller working or seating arrangements.
How much weight can each Camar Prisma leg support?
Each Camar Prisma leg has a load bearing capacity of 660 lb, allowing individual legs to support heavy tops or equipment in demanding work areas.
What diameter are these flat black steel table legs?
This flat black steel table leg set has a 2-3/8 inch diameter, creating a sturdy round column that helps limit flex and provides stable support.
Do these counter height table legs offer height adjustment?
The Prisma rounded table legs have built in 1-1/8 inch adjustable feet, allowing small height changes to level the work surface on uneven flooring.
How are the Prisma steel table legs attached to the top?
The Prisma steel table legs use separate brackets to attach to the table, creating a defined mounting interface between each leg and the underside of the surface.
What finish is on this Prisma rounded table leg set?
This Prisma rounded table leg set has a matte flat black finish, giving the legs a subdued look that coordinates with many countertop materials.
Select This Prisma Set For Counter Height Projects
The Camar Prisma rounded table leg set combines 34-1/4 inch height, 2-3/8 inch diameter steel construction, and a 660 lb per leg load bearing capacity for counter height work surfaces that need solid support. The matte flat black finish and separate brackets provide a defined look and connection method, while the built in 1-1/8 inch adjustable feet allow height tuning at installation. For projects built around the Peter Meier Prisma Series, this 4 leg pack gives a consistent leg specification that can be repeated across multiple counters or tables.
